The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=1/16 inch Shank Diam...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=5/64 inch D=2 mm Sha...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=3 mm Shank Diameter=...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=1/8 inch D=3.25 mm S...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=4 mm Shank Diameter=...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=5/32 inch D=3.96 mm ...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=3/16 inch D=4.7 mm S...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=6 mm Shank Diameter=...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=7/32 inch Shank Diam...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=7 mm Shank Diameter=...More Info
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions: D=1/4 inch D=6.3 mm Sh...More Info
The HSS drill bits are gripped by a spring steel collet into the hex shaft.
The hex shanks snap into the Quick Chuck.
The hex collar, is supplied in t...More Info
The HSS drill bits are gripped by a spring steel collet into the hex shaft.
The hex shanks snap into the Quick Chuck.
The hex collar, is supplied in t...More Info
Pack of 10 spare drills to suit the drill countersinks.
Supplied in a storage tube.
Dimensions:
D=1/8 inch
D=3.2 mm
Diameter Imperial: 1/8
Diame...More Info
Pack of 10 spare drills to suit the drill countersinks.
Supplied in a storage tube.
Dimensions:
D=3/32 inch
D=2.38 mm
Diameter Imperial: 3/32
Di...More Info
Pack of 10 spare drills to suit the drill countersinks.
Supplied in a storage tube.
Dimensions:
D=5/64 inch
D=1.98 mm
Diameter Imperial: 5/64
Di...More Info
Pack of 10 spare drills to suit the drill countersinks.
Supplied in a storage tube.
Dimensions:
D=7/64 inch
D=2.8 mm
Diameter Imperial: 7/64
Dia...More Info
Pack of 10 spare drills to suit the drill countersinks.
Supplied in a storage tube.
Dimensions:
D=9/64 inch
D=3.6 mm
Diameter Imperial: 9/64
Dia...More Info
Self-centring drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment .
It can be easily dismantled for ...More Info
Self-centring drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment .
It can be easily dismantled for...More Info
Self-centring drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment .
It can be easily dismantled for...More Info
One set comprising a Quick Chuck and three sizes of Drill Bit Guides for the accurate fitting of hinges.
Dimensions:
Shank Diameter=1/4 inch hex
...More Info
A set of seven quick change hex shank through hole drilling timber.
Supplied in a storage tube.
Dimensions:
Shank Diameter=1/4 inch hex
Drill dimen...More Info
The 15mm machine bit is designed to suit cam and dowel fixings.
It is recommended that these bits are used in a drill stand.
Dimensions:
D=15 mm
OL...More Info
For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. Dimensions: D=26 mm OL=60 mm Shank Di...More Info
For drilling blind holes for circular hinges in kitchen and cabinet doors.
Recommended for use in a drill stand.
Dimensions:
D=1 3/8 inch
D=35 mm
O...More Info
For drilling blind holes for circular hinges in kitchen and cabinet doors.
Recommended for use in a drill stand.
Dimensions:
D=40 mm
OL=55 mm
Shank...More Info