A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=3/8 inch
D=9.5 mm
C=7.5 mm
R=4.8 mm
Shank Diamet...More Info
A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=13 mm
C=12.5 mm
R=6 mm
Shank Diameter=1/4 inch
...More Info
A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=14.5 mm
C=19.5 mm
R=7.5 mm
Shank Diameter=1/4 in...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Shape similar to Ref. 18/80.
Suitable panel mould for use with Ref. PSC/5 & PSC/50.
8mm shank tools are for use with medium and heavy duty r...More Info
For use in a router table only.
Take 5 - 6 passes, increasing the depth with each pass.
Dimensions:
D=86 mm
C=1/2 inch
C=12.7 mm
B=12.7 mm
A=15 degr...More Info
For use in a router table only.
Take 3 - 4 passes, increasing the depth with each pass. Can be used for curved panels if a copy pin is used.
Dime...More Info
For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass.
Dimensions:
D=50 mm
D2=16 mm
C=17 mm
A=10 degrees
Shank Dia...More Info
For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass.
Dimensions:
D=45 mm
D2=11 mm
C=17 mm
A=10 degrees
Shank Dia...More Info