.
.
 


Thawte Secured with SSL Encryption
Search
 
Cold Chisels, Bolsters & Scutch Chisels
  Returned 68 Results
Faithfull Black Protective Grip 3/4in
Faithfull Black Protective Grip 3/4in

Designed to be fitted on to cold chisels, bolsters or flooring chisels.Gives protection to the hand from mis-directed hammer blows.To fit Size. 3/4in ... More Info

£5.23 INC VAT
Faithfull Black Protective Grip 5/8in
Faithfull Black Protective Grip 5/8in

Designed to be fitted on to cold chisels, bolsters or flooring chisels.Gives protection to the hand from mis-directed hammer blows.To fit Size. 5/8in ... More Info

£5.23 INC VAT
Faithfull Black Protective Grip 7/8in
Faithfull Black Protective Grip 7/8in

Designed to be fitted on to cold chisels, bolsters or flooring chisels.Gives protection to the hand from mis-directed hammer blows.To fit Size. 7/8in ... More Info

£5.23 INC VAT
Faithfull Chisel Bits 1.1/2in Pack 5
Faithfull Chisel Bits 1.1/2in Pack 5

Used in scutch comb holders when cutting and chipping masonry or brickwork, they are sometimes described as droves.Size 1.1/2inPack 5... More Info

£5.78 INC VAT
Faithfull Chisel Bits 1in Box 25
Faithfull Chisel Bits 1in Box 25

  Used in scutch comb holders when cutting and chipping masonry or brickwork, they are sometimes described as droves. Size 1in Box 25 ... More Info

£16.32 INC VAT
Faithfull Chisel Bits 1in Pack 5
Faithfull Chisel Bits 1in Pack 5

Used in scutch comb holders when cutting and chipping masonry or brickwork, they are sometimes described as droves.Size 1in Pack 5... More Info

£5.23 INC VAT
Faithfull Chisel Bits 2in Pack 5
Faithfull Chisel Bits 2in Pack 5

  Used in scutch comb holders when cutting and chipping masonry or brickwork, they are sometimes described as droves. Size 2in Pack 5 ... More Info

£6.72 INC VAT
Faithfull Cold Chisel 10in x 1/2in F0026
Faithfull Cold Chisel 10in x 1/2in F0026

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 10in x... More Info

£3.96 INC VAT
Faithfull Cold Chisel 10in x 1in - Pre Pack
Faithfull Cold Chisel 10in x 1in - Pre Pack

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 10in x... More Info

£9.84 INC VAT
Faithfull Cold Chisel 10in x 1in F0067
Faithfull Cold Chisel 10in x 1in F0067

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£9.34 INC VAT
Faithfull Cold Chisel 10in x 3/4in F0047
Faithfull Cold Chisel 10in x 3/4in F0047

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 10in x... More Info

£5.66 INC VAT
Faithfull Cold Chisel 12in x 1/2in F0027
Faithfull Cold Chisel 12in x 1/2in F0027

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 12in x... More Info

£4.75 INC VAT
Faithfull Cold Chisel 12in x 1in - Pre Pack
Faithfull Cold Chisel 12in x 1in - Pre Pack

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£10.92 INC VAT
Faithfull Cold Chisel 12in x 1in F0068
Faithfull Cold Chisel 12in x 1in F0068

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£11.28 INC VAT
Faithfull Cold Chisel 12in x 1in with Grip F0068g
Faithfull Cold Chisel 12in x 1in with Grip F0068g

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Fitted... More Info

£13.73 INC VAT
Faithfull Cold Chisel 12in x 3/4in F0048
Faithfull Cold Chisel 12in x 3/4in F0048

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£6.58 INC VAT
Faithfull Cold Chisel 18in x 1in F0071
Faithfull Cold Chisel 18in x 1in F0071

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£16.56 INC VAT
Faithfull Cold Chisel 18in x 3/4in F0051
Faithfull Cold Chisel 18in x 3/4in F0051

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£10.49 INC VAT
Faithfull Cold Chisel 24in x 1in F0073
Faithfull Cold Chisel 24in x 1in F0073

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£21.94 INC VAT
Faithfull Cold Chisel 24in x 3/4in F0053
Faithfull Cold Chisel 24in x 3/4in F0053

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£13.44 INC VAT
Faithfull Cold Chisel 4in x 1/4in F0001
Faithfull Cold Chisel 4in x 1/4in F0001

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£2.64 INC VAT
Faithfull Cold Chisel 5in x 3/8in F0010
Faithfull Cold Chisel 5in x 3/8in F0010

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£2.95 INC VAT
Faithfull Cold Chisel 6in x 1/2in F0022
Faithfull Cold Chisel 6in x 1/2in F0022

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£3.14 INC VAT
Faithfull Cold Chisel 6in x 1/4in F0003
Faithfull Cold Chisel 6in x 1/4in F0003

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£2.95 INC VAT
Faithfull Cold Chisel 8in x 1/2in F0024
Faithfull Cold Chisel 8in x 1/2in F0024

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 8in x ... More Info

£3.62 INC VAT
Faithfull Cold Chisel 8in x 1in F0065
Faithfull Cold Chisel 8in x 1in F0065

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£7.99 INC VAT
Faithfull Cold Chisel 8in x 3/4in F0045
Faithfull Cold Chisel 8in x 3/4in F0045

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£5.18 INC VAT
Faithfull Cold Chisel 9in x 1in Foo66
Faithfull Cold Chisel 9in x 1in Foo66

Manufactured from octagon steel, used for cutting small section steel, brick and concrete. Cutting edge with approximately 60 degree angle. Size. ... More Info

£8.64 INC VAT
Faithfull Concrete Point 12in x 1/4in F0433
Faithfull Concrete Point 12in x 1/4in F0433

Used for bursting concrete and brickwork.Channels in concrete flooring should be marked out with a suitable flat chisel, prior to using concrete point... More Info

£8.11 INC VAT
Faithfull F0391 Brick Bolster 3in with Grip
Faithfull F0391 Brick Bolster 3in with Grip

Manufactured for cutting bricks during building work.This chisel has a suitably hardened cutting edge, but should not be used on concrete containing r... More Info

£12.12 INC VAT
Faithfull F0393 Brick Bolster 4in with Grip
Faithfull F0393 Brick Bolster 4in with Grip

Manufactured for cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containi... More Info

£14.23 INC VAT
Faithfull F0402 Brick Bolster 3in
Faithfull F0402 Brick Bolster 3in

Manufactured for cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containi... More Info

£9.00 INC VAT
Faithfull F0402 Brick Bolster 3in - Walleted
Faithfull F0402 Brick Bolster 3in - Walleted

Manufactured for cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containi... More Info

£10.39 INC VAT
Faithfull F0404 Brick Bolster 4in
Faithfull F0404 Brick Bolster 4in

Manufactured for cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containi... More Info

£10.70 INC VAT
Faithfull F0404 Brick Bolster 4in - Walleted
Faithfull F0404 Brick Bolster 4in - Walleted

Manufactured for cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containi... More Info

£12.41 INC VAT
Faithfull F0411 Flooring Chisel 2.1/4in
Faithfull F0411 Flooring Chisel 2.1/4in

  Designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. Hardened and tempered cut... More Info

£7.10 INC VAT
Faithfull F0414G Flooring Chisel 2.1/4 with Grip
Faithfull F0414G Flooring Chisel 2.1/4 with Grip

  Designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. Fitted with a sturdy rubb... More Info

£12.36 INC VAT
Faithfull F0416 Fluted Plugging Chisel 230mm x 5mm
Faithfull F0416 Fluted Plugging Chisel 230mm x 5mm

  Designed to remove mortar from between bricks either prior to re-pointing or the removing of a brick. The cutting edge is wider than the ... More Info

£8.33 INC VAT
Faithfull F0418g Fluted Plugging Chisel with Grip 230mm x 5mm
Faithfull F0418g Fluted Plugging Chisel with Grip 230mm x 5mm

Designed to remove mortar from between bricks either prior to re-pointing or the removing of a brick.The cutting edge is wider than the blade to give ... More Info

£13.08 INC VAT
Faithfull F0426 Dome Head Chasing Chisel 2in
Faithfull F0426 Dome Head Chasing Chisel 2in

For cutting channels for cables in cement, rendering, plaster, brick and breeze block.   Special heat treated dome head with strong hardene... More Info

£11.93 INC VAT
Faithfull F0476 Scutch Comb Holder 8in x 1in
Faithfull F0476 Scutch Comb Holder 8in x 1in

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.Size. 8in x 1in..... More Info

£12.58 INC VAT
Faithfull F0477 Scutch Comb Holder 8in x 1.1/2in
Faithfull F0477 Scutch Comb Holder 8in x 1.1/2in

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.Size. 8 x 1.1/2in.... More Info

£13.90 INC VAT
Faithfull Scutch Comb Holder 8in x 1in - Pre Pack
Faithfull Scutch Comb Holder 8in x 1in - Pre Pack

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.Size. 8in x 1in..... More Info

£13.03 INC VAT
Faithfull Scutch Combs 1.1/2in Box 25
Faithfull Scutch Combs 1.1/2in Box 25

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£23.23 INC VAT
Faithfull Scutch Combs 1.1/2in Pack 5
Faithfull Scutch Combs 1.1/2in Pack 5

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£5.78 INC VAT
Faithfull Scutch Combs 1in Box 25
Faithfull Scutch Combs 1in Box 25

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£17.42 INC VAT
Faithfull Scutch Combs 1in Pack 5
Faithfull Scutch Combs 1in Pack 5

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£5.14 INC VAT
Faithfull Scutch Combs 2in Box 25
Faithfull Scutch Combs 2in Box 25

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£29.14 INC VAT
Faithfull Scutch Combs 2in Pack 5
Faithfull Scutch Combs 2in Pack 5

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£6.43 INC VAT
Stanley Brick Bolster 4in x 8.1/2in 4-18-297
Stanley Brick Bolster 4in x 8.1/2in 4-18-297

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£13.16 INC VAT
Stanley Brick Punch 3/8in x 5.1/2in 4-18-236
Stanley Brick Punch 3/8in x 5.1/2in 4-18-236

Pin punch Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines , hole locations and pil... More Info

£3.70 INC VAT
Stanley Cold Chisel 1/2in x 6in 4-18-287
Stanley Cold Chisel 1/2in x 6in 4-18-287

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£3.82 INC VAT
Stanley Cold Chisel 1in x 12in 4-18-291
Stanley Cold Chisel 1in x 12in 4-18-291

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£11.50 INC VAT
Stanley Cold Chisel 3/4in x 6.7/8in 4-18-289
Stanley Cold Chisel 3/4in x 6.7/8in 4-18-289

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£5.62 INC VAT
Stanley Cold Chisel 3/8in x 5.9/16in 4-18-286
Stanley Cold Chisel 3/8in x 5.9/16in 4-18-286

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£3.82 INC VAT
Stanley Cold Chisel 5/8in x 6.3/4in 4-18-288
Stanley Cold Chisel 5/8in x 6.3/4in 4-18-288

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£4.34 INC VAT
Stanley Cold Chisel 7/8in x 8in 4-18-290
Stanley Cold Chisel 7/8in x 8in 4-18-290

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£8.42 INC VAT
Stanley Cold Chisel Kit 3pce 4-18-298
Stanley Cold Chisel Kit 3pce 4-18-298

For cutting , shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium. Cutting bolts, nuts and rivets. Type = Cold Chisel set 3pc ... More Info

£9.58 INC VAT
Stanley FatMax Brick Set 3in x 8.1/2in With Guard 4-18-327
Stanley FatMax Brick Set 3in x 8.1/2in With Guard 4-18-327

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£16.58 INC VAT
Stanley FatMax Brick Set 4in x 8-1/2in With Guard 4-18-328
Stanley FatMax Brick Set 4in x 8-1/2in With Guard 4-18-328

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£19.16 INC VAT
Stanley FatMax Cold Chisel 1in x 12in With Guard 4-18-332
Stanley FatMax Cold Chisel 1in x 12in With Guard 4-18-332

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£17.24 INC VAT
Stanley FatMax Concrete Chisel 3/4in x 12in With Guard 4-18-329
Stanley FatMax Concrete Chisel 3/4in x 12in With Guard 4-18-329

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£16.58 INC VAT
Stanley FatMax Electricians Chisel 2.1/4in x 10in C/W Guard 4-18-330
Stanley FatMax Electricians Chisel 2.1/4in x 10in C/W Guard 4-18-330

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£16.58 INC VAT
Stanley FatMax Floor Chisel 3in x 11in With Guard 4-18-331
Stanley FatMax Floor Chisel 3in x 11in With Guard 4-18-331

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£18.52 INC VAT
Stanley FatMax Masons Chisel 1.3/4in x 8.1/2in With Guard 4-18-333
Stanley FatMax Masons Chisel 1.3/4in x 8.1/2in With Guard 4-18-333

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£14.02 INC VAT
Stanley Masons Chisel 1.3/4in x 8.1/2in 4-18-294
Stanley Masons Chisel 1.3/4in x 8.1/2in 4-18-294

Quality chrome vanadium steel, increased strength and durability. Mason's chisels are used for cutting and splitting hard stone, brick and concrete. Q... More Info

£10.22 INC VAT
Stanley Punch & Chisel Set 12pce 4-18-299
Stanley Punch & Chisel Set 12pce 4-18-299

Chisels for cutting , shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium. Cutting bolts, nuts and rivetsPunches for marking c... More Info

£31.92 INC VAT
Stanley Utility Chisel 1.1/4in x 12in 4-18-292
Stanley Utility Chisel 1.1/4in x 12in 4-18-292

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£9.06 INC VAT