Product Code: 46/903X1/4TC Profiler with shank mounted bearing guides.
For use with router mounted above or below a table when following a template.
For profiling and rebating applications only.
Not for plunge cutting/grooving.
A 3mm maximum overlap should be left before trimming.
They are ideal for template making.
Refs. 46/910, 46/911 and 46/91 have a shorter cutter length for use on thin boards.
Refs. 46/900 and 46/902 have double bearings for stability.
Dimensions:
D=3/8inch
D=9.5 mm
C=1 inch
C=32 mm
Overall length=70 mm
B=12.7 mm
A=90 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 3/8
Diameter Metric: 9.5
Cut Length Imperial: 1
Cut Length Metric: 25
Overall Length Metric: 74
Bearing Diameter Metric: 9.5
Angle: 90
|