Product Code: C079AX1/2TC
Self-guiding cutters' class='desclinks'>cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
Dimensions:
D1=51 mm
C=1 inches
C=25 mm
Overall length=63 mm
B=9.5 mm
R1=3/4 inches
R1=19.1 mm
Shank Diameter=1/2
Shank Diameter: 1/2
Diameter Metric: 51
Cut Length Imperial: 1
Cut Length Metric: 25
Overall Length Metric: 63
Bearing Diameter Metric: 9.5
|
;)
