Product Code: LOCK/JIG/B
Adjustable sliding inserts to allow face-plate and mortise recesses for popular size door locks to be routed.
Fully adjustable for lock face plate length up to 250mm.
Quick and easy to set up using engraved lines for lock size and door sizes.
Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths.
Engraved on underside to allow set up for 35mm, 40mm, 44mm and 54mm door widths.
Deeper mortises can be achieved with a suitable size of auger bit.
Fast, clean & accurate results on doors 34mm to 54mm thick, even in hardwood.
Plastic laminate body with aluminium clamping bar.
Includes a pair of setting blocks for specific lock widths and to aid door centring.
The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 10mm spigot, 12mm diameter long reach cutter and two quick action clamps.
Dimensions:
Door thickness min.=30 mm
Door thickness max.=80 mm
Faceplate length min.=30 mm
Faceplate langth max.=250mm
Face Plate Dimension Widths
22.5 mm
25.4 mm (1 inch)
Mortise Dimension Widths
16 mm (5/8 inch)
19 mm (3/4 inch)
|
;)
