Product Code: QR/SET/2
Heavy duty fabric tool holder with a selection of assorted Craft Pro tools.
Magnetic Quick Chuck which is fitted into a standard 3/8-inch key or keyless chuck and allows any direct drive 1/4-inch hex bits to then 'snap' in effortlessly.
Flat bits 16mm, 19mm, 22mm, 25mm and 30mm diameter.
Auger bits 10mm and 13mm diameter.
Hex drill bits 1.5mm, 2mm 3mm, 4mm, 5mm, 6mm and 7mm diameter.
Drill bit guides 2mm and 2.75mm for hinges.
Drill countersinks with 2.5mm, 3.25mm and 3.5mm drill bits.
Twenty-three 25mm insert bits Pozi, Phillips, slotted, Torx and hex.
Three Pozi 50mm screwdriver bits.
Magnetic bit holder with retractable barrel.
Magnetic nut drivers for 6mm, 8mm, 10mm and 12mm A/F bolts.
Square drive adapters 1/4-inch, 3/8-inch and 1/2-inch A/F.
Tungsten Carbide Tipped masonry drills 5mm, 6mm, 7mm and 8mm diameter.
Deburr countersink and hole enlarger tools.
Set supplied in tool holder with elasticated pockets to hold quick change shank and belt strap and are hook and loop fastening.
Dimensions:
Size=300 mm x 165 mm
Tools up to 155 mm=20
Tools up to 80 mm=15
Screwdriver insert bits=23
Quick chucks=2
Belt strap=2
|
