Two part adjustable block portable template set designed for recessing hinges in wooden doors & frames with a router.
It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
Used on-site & in joinery shops to increase productivity with excellent results.
Four apertures for fire door requirements.
No need for marking out in the conventional way.
Quick & simple to set-up as the hinge is used as the pattern.
Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
Use with a light duty plunge router with 1/4 inch collet.
Long reach router cutter required, 12mm diameter with 70mm overall length.
Adjustable edge guides with preset for hinge of 20mm, 25mm and 30mm
Unibase may be needed.
Patent No. GB2285410, GB1106608.1
T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.

Dimensions:
Hinge sizes possible
Length min.=2 5/8" (67 mm)
Length max.=5" (127 mm)
Width min.=1/2" (12.7 mm)
Width max.=1 3/8" (35 mm)

Door sizes possible
Height min.=6' 5" (1956 mm)
Height max.=2100 mm*
Thickness min.=5/8" (16 mm)
Thickness max.=2" (51 mm)
* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.
Weight= 2.9 kg
Jig overall length=1956 mm