.
.
 


Thawte Secured with SSL Encryption
Search
 
Armeg G225B4CC30 30mm Channelling Chisel
TitleEx. VATInc. VATQtyBuy
Armeg G225B4CC30 30mm Channelling Chisel£30.34£36.41
Click For Bigger Image
Product Code: ARMG225B4CC30

Features-
Ideal for rapidly producing a 30mm channel in masonry for electrical conduit or pipe work
Cranked off set design maximises ease of use
Designed on an SDS Plus drive system for machines with roto-stop facility

Can be used in
•Soft brick
•Medium density block

Specifications-
Prior to using chisels, please ensure your machine has the ‘chisel only’ function as they are designed to be used on this function only.
Before using this product the chuck shank should be thoroughly lubricated.
Minimal force should be applied when being used.
After using the product continuously for 10-15 minutes the chisel must be removed from the chuck and allowed to cool at room temperature.
Lubrication must be re-applied before re-using.
Products can fail on the shank due to temperature build up of 200°C.
Misuse of the product will decrease the maximum time usage significantly. Shank failure due to temperature build up is not warranted.

Tech-Tips
•Channelling Chisels can be sharpened when the cutting edges become blunt, ideally using a grinder or good quality file and replicating the original profile as much as possible
•SDS Plus shanks should be greased prior to and during use. This reduces heat build-up which reduces wear on the chisel and on the machine