Use for bevelling and chamfering.
A flat, approximately 1.0mm, will be found on V Groove tip.
Ref. 11/3 is ideal for imitating 'V' jointed tongue ...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling and chamfering.
A flat, approximately 1.0mm, will be found on V Groove tip.
Ref. 11/3 is ideal for imitating 'V' jointed tongue ...More Info
Use for bevelling and chamfering.
A flat, approximately 1.0mm, will be found on V Groove tip.
Ref. 11/3 is ideal for imitating 'V' jointed tongue ...More Info
Use for bevelling and chamfering.
A flat, approximately 1.0mm, will be found on V Groove tip.
Ref. 11/3 is ideal for imitating 'V' jointed tongue ...More Info
Use for bevelling and chamfering.
A flat, approximately 1.0mm, will be found on V Groove tip.
Ref. 11/3 is ideal for imitating 'V' jointed tongue ...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm incremen...More Info
To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm incremen...More Info
Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing.
Spacers are supplied to ensure the minimal th...More Info
Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.
Dimensions:
OL=83 mm
Spindle Length=45mm
Threaded part=20mm
Shank Leng...More Info
Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing.
Spacers are supplied to ensure the minimal th...More Info
Standard duty arbor with 1/4 inch spindle and spacers.
Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions...More Info
Standard duty arbor with 1/4 inch spindle and spacers.
Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of position...More Info
A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up.
Dimensions:
D=41 mm
C=6.35 mm
C2=10 mm
E=22 mm
Shank Diame...More Info
Allows decorative cuts in panels and frames to disguise glue lines.
Dimensions:
D=36 mm
C=6 mm
R=3 mm
Bore=1/4 mm
Grade: TCT
Diameter Metric: 36...More Info
Ideal for hiding pipes and cables.
Part of curve can be used for producing decorative edges.
An initial slot is required before using the ball groov...More Info
Two flute.
For trimming of laminate and solid lipping.
1.6mm deep 'V' groove to hide glue line.
Dimensions:
D=16 mm
D2=12.7 mm
C=1 inch
C=25.4 m...More Info
Specially designed tools for aluminium composite cladding material such as Alucobond, Dibond which comprises an aluminium cover with polyethylene core...More Info
Specially designed tools for aluminium composite cladding material such as Alucobond, Dibond which comprises an aluminium cover with polyethylene core...More Info
For veining, panelling, 'V' grooving, bevelling & chamfering.
Dimensions:
D=3/4 inch
D=19.1 mm
Overall length=70.5 mm
A=60 degrees
Shank Diameter=1/4...More Info
For veining, panelling, 'V' grooving, bevelling & chamfering.
Dimensions:
D=3/4 inch
D=19.1 mm
C=9.2 mm
C2=13 mm
OL=65 mm
A=45 degrees
Shank Diameter...More Info