Ideal for fast chamfering.
Popular in the sign making trades.
For chamfering edges of plastic material .
Dimensions:
C=10 mm
C2=14 mm
P=5.5mm
A=4...More Info
Template thickness should be 5mm thicker than cut length of cutter.
Dimensions:
D=19 mm
C=11 mm
OL=55 mm
B=19 mm
R=3/8 inch
R=9.5 mm
Shank Diameter=1...More Info
Template thickness should be 5mm thicker than cut length of cutter.
Dimensions:
D=19 mm
C=32 mm
OL=80 mm
B=19 mm
R=3/8 inch
R=9.5 mm
Shank Diameter=1...More Info
Ideal for following templates when panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than t...More Info
Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter.
Dimensio...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=3/4 inch
D=19....More Info
Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=1 inch
D=25.4 ...More Info
Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=1 1/2 inch
D=3...More Info
Bearing guided tool to rout multi-point lock systems in wooden doors.
Two flute for clean finish.
Use in conjunction with multi-point lock system cu...More Info
Recessing cutter is designed to accommodate the Carripile I style weatherstrip . It comes complete with a guide bearing to reduce setting-up time and...More Info
Recessing cutter is designed to accommodate the Carripile II style weatherstrip. It comes complete with a guide bearing to reduce setting-up time. C...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensions:...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensions:...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensions:...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensions:...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensions:...More Info
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensions:...More Info
Three flutes for extra fine finish.
Ideal for newel posts and caps for stairs.
Supplied with one bearing..
Dimensions:
D1=34 mm
Cut length=11 mm
A=...More Info
Two flute mini-trim with guide bearing will profile intricate shapes.
Max. 2.0mm trimming.
Dimensions:
D=1/4 inch
D=6.3 mm
C=1/2 inch
C=12.7 mm
B=6...More Info
Two flute mini-trim with guide bearing will profile intricate shapes.
Max. 2.0mm trimming.
Dimensions:
D=1/4 inch
D=6.3 mm
C=25.4 mm
B=Fractionally...More Info
Profiler with shank mounted bearing guides.
For use with router mounted above or below a table when following a template.
For profiling and rebating...More Info
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-...More Info