Trend at MTS Power Tools

Categories

Browse By Brand

Trend

The Trend name is synonymous with routing. Trend were the original importers of the legendery ELU router brand, famous for such models as the MOF96, MOF96E and MOF177 E. Dewalt purchased the ELU company and launched their own range of routers such as the DW615 and DW625 E plunge routers. The Trend T10 and T11 routers are based on the DW625https://www.mtspowertools.co.uk/product.php/section//sn/DEW625EK

TREND 2/01X1/4TC SINGLE FLUTE 1.5MM DIA X 6MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£31.80 INC VAT

TREND 2/02X1/4TC SINGLE FLUTE 1.8MM DIA X 6MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£34.58 INC VAT

$TREND 2/06X1/4TC Single flute cutter 6.3mm diameter 1/4\" Shank$

TREND 2/06X1/4TC Single flute cutter 6.3mm diameter 1/4" Shank

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£9.95 INC VAT

TREND 2/0X1/4TC SINGLE FLUTE 1.0MM DIA X 3MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£27.32 INC VAT

TREND 2/10X1/4TC SINGLE FLUTE 2MM DIA X 5MM 257058

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£33.68 INC VAT

TREND 2/12X1/4TC SINGLE FLUTE 2.7MM DIA X 8MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£36.30 INC VAT

TREND 2/15X1/4TC SINGLE FLUTE 3MM DIA X 11MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£38.20 INC VAT

TREND 2/1X1/4TC SINGLE FLUTE 1.6MM DIA X 5MM 257057

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£39.04 INC VAT

TREND 2/40LX1/4HSS POCKET 4.8MM DIA X 19MM CUT

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will g... More Info

£13.33 INC VAT

TREND 2/40X1/2TC Single flute cutter 4.8mm diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£6.45 INC VAT

TREND 2/45X1/4TC SINGLE FLUTE 5MM DIA X 19MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£46.32 INC VAT

TREND 2/61X1/4TC SINGLE FLUTE 6.3MM DIA X 25MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£41.84 INC VAT

$TREND 2/63X1/2TC Single flute cutter 7.9mm diameter 1/2\" Shank$

TREND 2/63X1/2TC Single flute cutter 7.9mm diameter 1/2" Shank

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£9.95 INC VAT

TREND 2/6X1/4TC SINGLE FLUTE 6.3 DIA X 19MM 253332

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£30.94 INC VAT

TREND 2/7X1/2TC SINGLE FLUTE 9.5MM DIA X 25MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S a... More Info

£39.90 INC VAT

TREND 2/82X1/2TC - Single flute cutter 12.7mm diameter

Single flute for fast cutting. D =12.7mm C =50mm OL = 108mm ... More Info

£14.77 INC VAT

TREND 21/1X1/2TC GUIDED HOUSING 19.1MMDIAX11.1MMCUT

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Dimensions: D=3/4 inch D=19.... More Info

£60.84 INC VAT

TREND 21/1X1/4TC GUIDE HOUSING 19.1MM X 11.1MM CUT

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Dimensions: D=3/4 inch D=19.... More Info

£60.84 INC VAT

TREND 21/2X1/2TC GUIDED HOUSING 25.4MMDIAX11.1MM CUT

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Dimensions: D=1 inch D=25.4 ... More Info

£63.62 INC VAT

TREND 21/3X1/2TC GUIDED HOUSING 38.1MM DIA X 16MMCUT

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Dimensions: D=1 1/2 inch D=3... More Info

£89.00 INC VAT

$TREND 22/01X1/4TC Classic ogee cutter 1/4\" Shank$

TREND 22/01X1/4TC Classic ogee cutter 1/4" Shank

Professional Router Cutters Ogee Panel Classic cutter Dimensions: D=26 mm C=6 mm C2=10 mm R=2 mm R2=6 mm Shank Diameter=1/4 inch ... More Info

£9.95 INC VAT

TREND 22/03X1/2TC FLAT OGEE 6MM RAD X 20MM DIA

Produces an elegant edge mould, or a shallow panel effect when routing on its full width. Dimensions: D=20 mm C=15 mm R=6 mm Shank Diameter=1/2 inch ... More Info

£69.20 INC VAT

TREND 22/08X1/2TC LARGE ROMAN OGEE R19 X 41.5MM DIA

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Dimensions: D=41.5 mm C=8 mm C2=8 mm R=19 mm R2=1... More Info

£110.82 INC VAT

TREND 22/1X1/2TC FLAT ROMAN OGEE 20MM R1 X 12MM R2

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Dimensions: D=50 mm C=6.5 mm C2=11.5 mm R=20 mm R... More Info

£110.82 INC VAT

TREND 22/7X1/2TC Astragal mould cutter

Classic flat roman ogee cutter. D = 40mm C = 9mm C2 = 11mm R =22mm R2 = 4mm Shank dia. 1/2" ... More Info

£19.85 INC VAT

TREND 2214/114WS PLUG MAKER MATCH 1 1/4 INCH DIA

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have fo... More Info

£138.78 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143]

Terms & Conditions