.
.
 
Search
 
Trend
147 items are stocked by MTS Power Tools

The Trend name is synonymous with routing. Trend were the original importers of the legendery ELU router brand, famous for such models as the MOF96, MOF96E and MOF177 E. Dewalt purchased the ELU company and launched their own range of routers such as the DW615 and DW625 E plunge routers. The Trend T10 and T11 routers are based on the DW625https://www.mtspowertools.co.uk/product.php/section//sn/DEW625EK

TREND S11/01X1/4STC ENGRAVER 82.5 DEG X 5MM DIA
TREND S11/01X1/4STC ENGRAVER 82.5 DEG X 5MM DIA

Solid Carbide for long life. Ideal for engraving and veining work. Dimensions: D=5 mm C=15 mm C2=16 mm A=82.5 degrees Shank Diameter=1/4 inch Sha... More Info

£78.90 INC VAT
TREND S11/11X1/4STC TRIPLE FLUTE ENGRAVER A=60¡ 257083
TREND S11/11X1/4STC TRIPLE FLUTE ENGRAVER A=60¡ 257083

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing. Dimensions: D=14.5 m... More Info

£109.36 INC VAT
TREND S11/11X8MMSTC TRIPLE FLUTE ENGRAVER A=60¡
TREND S11/11X8MMSTC TRIPLE FLUTE ENGRAVER A=60¡

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing. Dimensions: D=14.5 ... More Info

£109.36 INC VAT
TREND S2/6X1/4STC SINGLE FLUTE 6.3MM DIA X 10MM CUT
TREND S2/6X1/4STC SINGLE FLUTE 6.3MM DIA X 10MM CUT

Greater duribility. Better plunge characteristics. Single flute - faster feed rates. Single flute cutters should not be used in eccentric chucks. Dim... More Info

£66.08 INC VAT
Trend S3/12X1/4STC Two Flute Cutter 6.3mm Diameter
Trend S3/12X1/4STC Two Flute Cutter 6.3mm Diameter

Cutter is machined from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. Offers better p... More Info

£6.45 INC VAT
TREND S3/21X1/4STC TWO FLUTE 6.3MM DIA X 28MM CUT
TREND S3/21X1/4STC TWO FLUTE 6.3MM DIA X 28MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=28 mm OL=63 mm Shank Diameter=1/4 inch... More Info

£16.45 INC VAT
TREND S3/22X1/4STC TWO FLUTE 6.3MM DIA X 25MM 253336
TREND S3/22X1/4STC TWO FLUTE 6.3MM DIA X 25MM 253336

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=25 mm OL=50 mm Shank Diameter=1/4 inch... More Info

£60.96 INC VAT
TREND S3/81X1/2STC TWO FLUTE 12.7MM DIA X 32MM CUT
TREND S3/81X1/2STC TWO FLUTE 12.7MM DIA X 32MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/2 inch D=12.7 mm C=32 mm OL=77 mm Shank Diameter=1/2 inc... More Info

£156.34 INC VAT
TREND S47/4X1/4STC PIERCE/TRIM 6.3MM DIA X 20MM CUT
TREND S47/4X1/4STC PIERCE/TRIM 6.3MM DIA X 20MM CUT

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted.... More Info

£59.20 INC VAT
TREND S47/70X1/4STC ECONOMY TRIM A=60¡X6.3MM DIA 257121
TREND S47/70X1/4STC ECONOMY TRIM A=60¡X6.3MM DIA 257121

Solid Tungsten Carbide economy cutter. For use on short runs at 90 degree or 60 degree with Ref. S47/70, at 90 degree or 83 degrees with Ref. S47/71... More Info

£53.46 INC VAT
TREND S47/71X1/4STC ECONOMY TRIM 7 DEG BEVEL
TREND S47/71X1/4STC ECONOMY TRIM 7 DEG BEVEL

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41... More Info

£48.42 INC VAT
TREND S47/72X1/4STC ECONOMY V GROOVE 45 DEG
TREND S47/72X1/4STC ECONOMY V GROOVE 45 DEG

Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides ... More Info

£48.42 INC VAT
TREND S48/39X1/4STC ECONOMY TRIM A=90¡X6.3MM DIA X 38MM
TREND S48/39X1/4STC ECONOMY TRIM A=90¡X6.3MM DIA X 38MM

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41... More Info

£48.42 INC VAT
TREND S48/40X1/4STC ECONOMY TRIM A=90¡X6.3DX52MM 257122
TREND S48/40X1/4STC ECONOMY TRIM A=90¡X6.3DX52MM 257122

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41... More Info

£55.86 INC VAT
TREND S48/41X1/4STC ECONOMY 7 DEG TRIM GUIDED 6.35MM DI
TREND S48/41X1/4STC ECONOMY 7 DEG TRIM GUIDED 6.35MM DI

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41... More Info

£48.42 INC VAT
TREND S48/42X1/4STC ECONOMY FLUSH & TRIM 6.35MM GUIDED
TREND S48/42X1/4STC ECONOMY FLUSH & TRIM 6.35MM GUIDED

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41... More Info

£48.42 INC VAT
TREND S49/01X1/4STC CARBIDE RASP 6.3MM DIA X 20MM CUT
TREND S49/01X1/4STC CARBIDE RASP 6.3MM DIA X 20MM CUT

Solid carbide rasp. Solid coarse cut Carbide Rasp/Burr. For grinding, carving and shaping of glass reinforced plastics (GRP). Use at speed 10000 ... More Info

£59.74 INC VAT
TREND S49/10X1/4STC CARBIDE RASP 12.7MM DIA X 19MM CUT
TREND S49/10X1/4STC CARBIDE RASP 12.7MM DIA X 19MM CUT

Solid coarse cut Carbide. Rasp/Burr. For grinding, carving and shaping of glass reinforced plastics (GRP). With twin roller bearings, is ideal for... More Info

£120.98 INC VAT
TREND S49/1X1/4STC CARBIDE RASP 6.3MM DIA X 20MM CUT
TREND S49/1X1/4STC CARBIDE RASP 6.3MM DIA X 20MM CUT

Solid fine cut Carbide. Rasp/Burr. For grinding, carving and shaping of glass reinforced plastics (GRP). Use at speed 10000 -30000 RPM. For plung... More Info

£54.66 INC VAT
TREND S49/21X3MMSTC S/CARBIDE BURR 6MM DIA BALL NOSE
TREND S49/21X3MMSTC S/CARBIDE BURR 6MM DIA BALL NOSE

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For rem... More Info

£39.46 INC VAT
TREND S49/22X3MMSTC S/CARBIDE BURR 6MM DIA TREE
TREND S49/22X3MMSTC S/CARBIDE BURR 6MM DIA TREE

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For rem... More Info

£43.32 INC VAT
TREND S49/23X3MMSTC S/CARBIDE BURR 3MM DIA FLAME
TREND S49/23X3MMSTC S/CARBIDE BURR 3MM DIA FLAME

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For rem... More Info

£24.18 INC VAT
TREND S49/24X3MMSTC S/CARBIDE BURR 6MM DIA BALL END
TREND S49/24X3MMSTC S/CARBIDE BURR 6MM DIA BALL END

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For rem... More Info

£40.66 INC VAT
TREND S49/25X3MMSTC S/CARBIDE BURR X R1.5MM BALL NOSE
TREND S49/25X3MMSTC S/CARBIDE BURR X R1.5MM BALL NOSE

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For rem... More Info

£28.08 INC VAT
TREND S49/2X1/4STC S/CARBIDE BURR 10MM DIA CYLINDER
TREND S49/2X1/4STC S/CARBIDE BURR 10MM DIA CYLINDER

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For rem... More Info

£49.34 INC VAT
TREND S49/32X1/2STC ROUGHING 12.7X42MM PHENOLIC
TREND S49/32X1/2STC ROUGHING 12.7X42MM PHENOLIC

Solid carbide spiral roughing tool to rout a composite materials including phenolics, carbon fibre, fibreglass and Trespa. Unique grinding and multi-... More Info

£161.08 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143]
 
Terms & Conditions