To increase gluing area producing a strong joint in drawer production.
Dimensions:
D=25.4 mm
C=12.7 mm
Shank Diameter=1/2 inch
Timber thickne...More Info
To make round boxes, planters, barrels, or other multi-sided components.
One side of the component is machined with the cutter.
Fast and accurate joi...More Info
To make round boxes, planters, barrels, or other multi-sided components.
One side of the component is machined with the cutter.
Fast and accurate joi...More Info
Machining of this joint is carried out by routing one piece with the inside face on the table.
The matching corner inside face is machined upright a...More Info
For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct dept...More Info
For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct dept...More Info
For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct dept...More Info
A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints.
Dimensions:
D=24.6 mm
C=18.5 mm
OL=58 mm
B=12....More Info
Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefo...More Info
This Comb Jointing Set can be fitted to all heavy duty routers mounted in a fixed head position.
It comprises a set of five 4mm kerf, TCT groovers, ...More Info
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides t...More Info
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides t...More Info
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides t...More Info
Ideal for speaker cabinets and drawer construction.
Please note. This tool cannot be re-sharpened.
Inverted use only.
Dimensions:
D=68 mm
C=30 mm
...More Info
Ideal for speaker cabinets and drawer construction.
Please note.
This tool cannot be re-sharpened.
Inverted use only.
Dimensions:
D=42 mm
C=14.3
...More Info
One piece tool to increase glueing area for edge to edge joint.
Dimensions:
D=35 mm
C=38.1 mm
B=19.1 mm
Shank Diameter=1/2 inch
Timber thickness
Min...More Info
Enables biscuit jointing with timber, man-made fibre 7 particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit...More Info
Enables biscuit jointing with timber, man-made fibre 7 particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit...More Info