Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' jointed...More Info
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens.
Dimension...More Info
Ideal for fast chamfering.
Popular in the sign making trades.
For chamfering edges of plastic material .
Dimensions:
C=10 mm
C2=14 mm
P=5.5mm
A=4...More Info
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
Ideal for use by wood turners with sm...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' joi...More Info
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Tool Ref....More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM.
Matches our range of profile scribers.
Suitable for use on natural...More Info
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi...More Info
Shape similar to Ref. 18/80.
Suitable panel mould for use with Ref. PSC/5 & PSC/50.
8mm shank tools are for use with medium and heavy duty routers
...More Info
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For full bevels, template should be ...More Info
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For full bevels, template should be ...More Info
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For full bevels, template should be ...More Info
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For full bevels, template should be ...More Info
Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
For full bevels, template should be ...More Info
Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Dimensions:
D=35.1 mm
C=12 mm
C2=16 mm
B=12.7 mm
A=45 degrees
Shank Diameter=...More Info
Cut a wider edge line, at an angle of 80 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm bearing will spread the wear of the cutting ...More Info
Cut a wider edge line, at an angle of 60 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm bearing will spread the wear of the cutting e...More Info
Cut a wider edge line, at an angle of 45 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm bearing will spread the wear of the cutting e...More Info
Cut a wider edge line, at an angle of 30 degrees.
A 16mm bearing is supplied as standard.
A larger 19mm bearing will spread the wear of the cutting e...More Info
Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.
Dimensions:
D1=5/8 inches
D1=15.9 mm
Cut length=1/...More Info
For veining, panelling, 'V' grooving, bevelling & chamfering.
Dimensions:
D=1/2 inch
D=12.7 mm
C=15/64 inch
C=6 mm
A=45 degrees
Shank Diameter=1/2 in...More Info
Two flute cutters for producing extra clean cut bevelled edges.
No plunge cut.
Dimensions:
D=7/8 inch
D=22.2 mm
C=25/64 inch
C=10 mm
A=67 degrees
...More Info
Two flute cutters for producing extra clean cut bevelled edges.
No plunge cut.
Dimensions:
D=1 inch
D=25.4 mm
C=25/64 inch
C=10 mm
A=60 degrees
Sh...More Info
Two flute cutters for producing extra clean cut bevelled edges.
No plunge cut.
Dimensions:
D=1 3/8 inch
D=34.9 mm
C=25/64 inch
C=10 mm
A=45 degree...More Info
Ideal for fast chamfering.
Popular in the sign making trades.
For chamfering edges of plastic material .
Dimensions:
C=10 mm
P=5.5 mm
A=45 degre...More Info
Self-guiding chamfer/bevel cutter.
Bearing follows the board beneath.
Dimensions:
D=32 mm
C=1/2 inch
C=12.7 mm
B=9.5 mm
A=45 degrees
Shank Diameter=1...More Info
This is bearing guided and gives a smooth bevel finish for laminates and other materials.
Bearing follows the board beneath.
Dimensions:
D=15.1 mm
...More Info
This is bearing guided and gives a smooth bevel finish for laminates and other materials.
Bearing follows the board beneath.
Dimensions:
C=1/4 inch...More Info
Ideal for posts and newel caps for stairs.
Dimensions:
D1=34.9 mm
C=20.6 mm
B=12.7 mm
A=60 degrees
Shank Diameter=1/4 inches
Shank Diameter: 1/4
...More Info
Ideal for posts and newel caps for stairs.
Dimensions:
D1=30.9 mm
C=22 mm
B=12.7 mm
A=67.5 degrees
Shank Diameter=1/4 inches
Shank Diameter: 1/4
...More Info
Ideal for posts and newel caps for stairs.
Dimensions:
D1=22.9 mm
C=19.1 mm
B=12.7 mm
A=70 degrees
Shank Diameter=1/4 inches
Shank Diameter: 1/4
...More Info
Ideal for posts and newel caps for stairs.
Dimensions:
C=1/2 inch
C=12.7 mm
B=9.5 mm
A=60 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Grad...More Info
Ideal for posts and newel caps for stairs.
Dimensions:
C=9/32 inch
C=7 mm
B=9.5 mm
A=30 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Grade:...More Info
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, comp...More Info
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, comp...More Info
For use in a router table only.
Take 5 - 6 passes, increasing the depth with each pass.
Dimensions:
D=86 mm
C=1/2 inch
C=12.7 mm
B=12.7 mm
A=15 degr...More Info
For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass.
Dimensions:
D=50 mm
D2=16 mm
C=17 mm
A=10 degrees
Shank Dia...More Info
For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass.
Dimensions:
D=45 mm
D2=11 mm
C=17 mm
A=10 degrees
Shank Dia...More Info
Self-guiding chamfer/bevel cutter.
Bearing follows the board beneath.
Dimensions:
D=51 mm
C=25 mm
B=12.7 mm
A=45 degrees
Shank Diameter=1/2 inch
Sh...More Info
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, comp...More Info
Specially designed tools for aluminium composite cladding material such as Alucobond, Dibond which comprises an aluminium cover with polyethylene core...More Info
A panel door set consisting of a Easyset profile scriber and panel raiser cutter. Supplied in a storage case.
Dimensions:
Shank Diameter=1/2 inch
Pr...More Info
These tools produce the same type of joint & use the same components as the combination PSC sets.
Both parts of the joint are cut by only changing the...More Info
Solid Tungsten Carbide economy cutter.
Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40.
Self guiding at 83 degrees with Ref. S48/41...More Info
Ideal for fast chamfering to remove edge on timber or create a decorative edge.
Dimensions:
D=1/2 inch
D=12.7 mm
Overall length=53 mm
A=45 degrees
Sh...More Info
Ideal for fast chamfering to remove edge on timber or create a decorative edge.
Dimensions:
D=1 1/4 inches
D=31.8 mm
Overall length=62 mm
B=9.5 mm
A=...More Info