Has three flutes, and has bevelled corners to prevent scoring, and is for flush trimming of hardwood or plastic edge strip.
Dimensions:
D=25 mm
C=12...More Info
Blades of cutters Refs. 46/01 & 46/03 can be rotated through 180 degrees to give one new cutting edge.
Blades for 46/010 can be rotated by exchangin...More Info
Blades of cutters Refs. 46/01 & 46/03 can be rotated through 180 degrees to give one new cutting edge.
Blades for 46/010 can be rotated by exchangin...More Info
Two flute mini-trim with guide bearing will profile intricate shapes.
Max. 2.0mm trimming.
Dimensions:
D=1/4 inch
D=6.3 mm
C=1/2 inch
C=12.7 mm
B=6...More Info
A self-guided combination trimmer.
A 90 degree trim is obtained by engaging the bottom half.
A 45 degree trim is obtained by lowering the cutter. ...More Info
Self guided with low profile ball bearing guide and bearing fixing screw.
For use in restrictive applications or within rebates of minimum 8mm.
Do...More Info
Self guided with low profile ball bearing guide and bearing fixing screw.
For use in restrictive applications or within rebates of minimum 8mm.
Do...More Info
Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay.
For copy profiling, use the bearing to foll...More Info
Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay.
For copy profiling, use the bearing to foll...More Info
Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay. For copy profiling, use the bearing to follo...More Info
Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay.
For copy profiling, use the bearing to foll...More Info
Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay.
For copy profiling, use the bearing to foll...More Info
Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay. For copy profiling, use the bearing to follo...More Info
Self-guiding triple flute cutter.
Extra fine trimming and longer life.
For trimming of laminate or plywood overlay etc.
A 2mm maximum overlap sh...More Info
Two flute.
For trimming of laminate and solid lipping.
1.6mm deep 'V' groove to hide glue line.
Dimensions:
D=16 mm
D2=12.7 mm
C=1 inch
C=25.4 m...More Info
For trimming the lipping of plastic overlay, and for rebating and
machining wood, Duralium and plastics.
Tungsten Carbide Tipped.
Use at speed 12000...More Info
Especially designed for routing Corian which is used in many bathrooms and kitchens. For trimming bowls, trepanning and face milling.
Dimensions:
D...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=3/8 inch
D=9.5 mm
C=1/2 inch
C=12.7 mm
B=9.5 m...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=3/8 inch
D=9.5 mm
C=1/2 inch
C=12.7 mm
B=9.5 m...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=1 inch
C=25.4 mm
B=12.7 m...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=1 inch
C=25.4 mm
...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D1=3/4 inches
D1=19.1 mm
C=1 inches
C=25 mm
Over...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D1=3/4 inches
D1=19.1 mm
C=1 inches
C=25 mm
Over...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=5/8 inch
D=15.9 mm
C=5/8 inch
C=15.9 mm
B=15.9...More Info
Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.
1/4" shank 75¡ bearing guided laminate trimmer...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1/2 inch
C=12.7 mm
B=6.35...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1 inch
C=25.4 mm
...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1 inch
C=25.4 mm
B=6.35 m...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=50 mm
B=12.7 mm
A=90 degr...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=38 mm
B=12.7 mm
A=90 degr...More Info
Allows templates to be placed either on top or the bottom of the material, for ease of routing.
Dimensions:
D=19 mm
C=50 mm
B=19 mm
A=90 degrees
Shan...More Info
Self-guiding triple flute cutter.
Extra fine trimming and longer life.
For trimming of laminate or plywood overlay.
Dimensions:
D=1/2 inch
D=12.7...More Info
Self guided with low profile ball bearing guide and bearing fixing screw.
For use in restrictive applications or within rebates of minimum 8mm.
Do...More Info
Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.
Can be used on wood and plastic.
Smal...More Info
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.
Self-guiding trimmer with bearings mounted on end...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info
For trimming and bevelling timber, lippings and plastic laminate edges.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive...More Info