Product Code: 10/99X1/2TC
Machining of this joint is carried out by routing one piece with the inside face on the table.
The matching corner inside face is machined upright against the fence.
Make sure that the cutter is centred on the workpiece. The cutter can also be used for a glue joint, for joining lengths together.
Ideal for speaker cabinets and drawer construction.
Please note.
These tools cannot be re-sharpened.
Inverted use only.
Dimensions:
D=68 mm
C=30mm
C2=12.5 mm
A=45 degrees
Shank Diameter=1/2 inch
Timber thickness
Min. 15mm
Max. 25mm
Shank Diameter: 1/2
Grade: TCT
Diameter Metric: 68
Cut Length Metric: 30
Angle: 45
|
;)
