Product Code: 2/7X1/2TC
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.
Small diameter tools must be handled with care to avoid breakage.
Single flute cutters should not be used in eccentric chucks.
Dimensions:
D1=3/8 inches
D1=9.5 mm
Cut length=25 mm
Overall length=70 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Grade: TCT
Diameter Imperial: 3/8
Diameter Metric: 9.5
Cut Length Metric: 25
Overall Length Metric: 70
|
;)
