Product Code: 46/090X1/2TC
Profiler with shank mounted bearing guides.
For use with router mounted above or below a table when following a template.
For profiling and rebating applications only.
Not for plunge cutting/grooving.
A 3mm maximum overlap should be left before trimming.
They are ideal for template making.
Refs. 46/910, 46/911 and 46/91 have a shorter cutter length for use on thin boards.
Refs. 46/900 and 46/902 have double bearings for stability.
Dimensions:
D=3/4 inch
D=19.1 mm
C=63 mm
B=19.1 mm
Overall length=115 mm
A=90 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 3/4
Diameter Metric: 19.1
Cut Length Imperial: 2 1/2
Cut Length Metric: 63
Overall Length Metric: 115
Bearing Diameter Metric: 19.1
Angle: 90
|
;)
