Line laser ADA CUBE 360 2V GREEN is a measurement equipment that will be appreciated by professional and private users due to its functions. Thanks to the special emitter the instrument projects 360 degrees horizontal beam. It is ideal instrument during construction and repair works when paving tile laying or other coating, wallpapering and so on.

Bright green beam. Green laser emitter is a main advantage of ADA CUBE 360 2V GREEN. Green beam is ideal for laser marking in bright light. Green laser beam provides the best visibility in comparison with red beam under the same working conditions.

Convenient marking. Line laser projects 2 vertical lines and 360° horizontal line. There is no need to rotate the instrument when making horizontal marking. Just place ADA CUBE 360 2V GREEN on the selected height. Horizontal beam will be along the perimeter. There is a 90° projection (laser cross) when switching on the vertical line. It is possible to switch off laser lines one-by-one. Just select the line that you need for a work.

Accurate levelling. Auto self-leveling. ADA CUBE 360 2V GREEN differs in high accuracy – the error is just 0,3 mm/m.

Receiver mode. There is a receiver mode for outdoor operation under bright light. The range of the marking increases from 40 to 70m.

Two places of attachment. It is possible to place ADA CUBE 360 2V GREEN on the tripod or attach to the wall mount due to the thread 1/4". One thread is located on the back part of the instrument, another is on the bottom.

TILT operation. It is possible to incline instrument at any angle working in this mode. Just lock the pendulum setting the switch on button in the middle position. Laser beams will be projected with required inclination. This function is used, for example, when setting stair railings.

Protected housing. The whole housing of ADA CUBE 360 2V GREEN is protected from all sides. Rubber parts protect the instrument against damages during falls and hits.

Elevating tripod. Light aluminum support with sliding column for installation at the height from 35 up to 110 cm. The elevating detail is used for smooth adjustment of the height in the range of 25 cm. The tripod provides for quick installation of the level at the required height in any place.

 

Laser projection 1H (360°) 2V

Working range 40 m / 70 m (with receiver) 

Accuracy ± 0,3 mm/m

Laser diode class 2, 515 nm, < 1 mWt

Dust/water protection IP 54

Power supply 3 x AA/1.5 V or 3.7 V/2000mAh battery or charger

Tripod thread 2x1/4"

Dimensions 95х95х65 mm

Weight 0,46 kg

 

Line laser

Telescopic tripod

Laser target

Li-On battery

Charger

Manual