Features-
Line
laser ADA CUBE 3-360 GREEN is the most compact
line laser that builds 3x360°
laser planes. Horizontal and vertical beams are projected by 360° due to the special emitter. Three mutually perpendicular
laser planes allow you to to easily mark out any
type of surface area. Ideal for construction or
repair work both for interior and exterior applications.
Bright
green beam. Green
laser emitter is a main advantage of ADA CUBE 3-360 GREEN. Green beam is ideal for
laser marking in bright
light. Green
laser beam provides the best visibility in comparison with red beam under the same
working conditions.
Convenient
laser marking. Laser
level projects three
laser planes: one horizontal and two vertical
lines. Scan
angle of all
lines is 360°. Beam for
laser marking is visible in any dot. There is no need to rotate a
tool. Just place ADA CUBE 3-360 GREEN at desired height. Intersecting
laser beams at a 90° from one another when switching on vertical
lines. Very convenient when aligning
walls and
angles between
walls. Laser
lines can be turned off one-by-one, leaving
only those that are necessary for the operation.
Accurate self-
leveling. The
laser beams automatically self-
level. ADA CUBE 3-360 GREEN distinguishes by its
high accuracy – the error is just 0,3mm/m.
Attachement options. The ADA Cube 3-360 GREEN can be attached to a
wall mount or a tripod with the help of the
thread ¼’’. One
thread is located on the back
side of the
tool, another one – on the bottom.
Durable. Rubber parts and
heavy-duty casing ensure the
laser leveler is strong and durable in all conditions. A ribbed surface makes it easy to
handle and protects the
tool from damages during fall and shocks.
Tilt mode. The device features a tilt mode allowing you to
work with the
laser at any
angle you like. Just fix the pendulum, switching a button into the middle position. Laser beams will be projected with the desired slope. Such function is useful, for example, when installing stair railing.
Detector mode. Use detector mode when operating in bright
light, out
side. Working range increases from 40 to 70 m.
Telescopic tripod. Lightweight
folding aluminum tripod with extendable column for setting
line laser at a height from 35 to 110 cm. Due to the lifting part it is possible to adjust the height in the range of 25 cm. A tripod allows you to set the
line laser at the desired height anywhere.
Specifications-
Laser projection 1H (360°) 2V(360°)
Working range 40 m / 70 m (with detector)
Accuracy ± 0,3 mm/m
Laser 2 class, 515 nm, < 1 mW
Dust/water protection IP 54
Dimensions 100×100×85 mm
Weight 0,46 kg
Includes-
Telescopic tripod
Laser target
Tube bag
Charger
Manual