Product Code: S55/22X1/4STC
Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in aluminium.
Single ÒOÓ flute design for fast cutting. Increased feed rates allowing for more linear metres in less time.
Super high polished cutting edge with unique mirror finish, resulting in clean cuts, less chance for chip re-welding, effortless chip removal, a superior finish and a longer tool life.
Downcut for better clamping when machining small workpieces and improved finish on the tops of the board.
For use on routers and CNC routers.
Strongly recommended that a lubricant or coolant is used to prolong tool life.
Upcut spiral can be used to plunge cut. Downcut not recommended for plunge cutting unless ramped into workpiece.
Eject chips up or down depending on tool used.
Designed for aluminium, brass and copper and other non ferrous metals.
Can be used on Alupanel and Dibond.
Dimensions:
D1=1/4 inches
D1=6.3 mm
Cut length=5/8 inches
Cut length=15.9 mm
Overall length=51 mm
Shank Diameter=1/4
Recommended speed=12,000-18,000 rpm
Shank Diameter: 1/4
Diameter Imperial: 1/4
Diameter Metric: 6.3
Cut Length Imperial: 5/8
Cut Length Metric: 15.9
Overall Length Metric: 51
|
;)
