Pro Multi-material worktop jig for up to 750mm worktop
FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing
EASY SET REFERENCE WINDOW Fast set up for any backset
5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends
4 DIFFERENT JIG OPTIONS 660mm long (500mm maximum joint length) for narrow bathroom vanity tops, 990mm long (750mm maximum joint length) standard kitchen worktop installations and 1190mm long (900mm maximum joint length) for wider breakfast bars and peninsular joints and standalone connector bolt, hinge and tap hole jig
FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handless contemporary styles without additional measuring or marking up
SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life
FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up
MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate
NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths, cuts any sized joint
FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut
OFFSET CAMS Unique backset wedges for consistent easy setting

EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles

Dimensions:
Length=985 mm
Width=335 mm
Thickness=12 mm
Weight=4.73 kg
End Cut=45 degrees
Corner Radius=40 mm
Corner Radius=100 mm
Corner Radius=400 mm
Corner Mitre Joint=45 degrees
Female cut material width loss (inset)=variable
Bolt recesses=3
Bolt recess centres=175 + 175 mm
Bolt recess width=14 mm
Guide bush=30 mm
Plunge router=1/2-inch (min. 1300 watts)
Cutter=12.7 mm x 50 mm cut
Clamps=Two