Product Code: 18/20X1/2TC
This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM.
Matches our range of profile scribers.
Suitable for use on natural timber and MDF.
When joining sections to produce solid wood panels, alternate the growth ring direction of adjacent boards to prevent cupping.
When moulding the panel, cut across the end grain first. Any break out will then be removed when cutting with the grain.
Suitable panel mould for use with Ref. PSC/5, PSC/50.
Dimensions:
D=50 mm
D2=16 mm
C=17 mm
A=10 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Grade: TCT
Diameter Metric: 50
Diameter 2 Metric: 16
Cut Length Metric: 17
Angle: 10
|
;)
