Product Code: DCK654P3T
The DEWALT DCK654P3T XR Compact TSTAK™ Kit, contains the following:
1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.
Chuck: 13mm Keyless.
No Load Speed: 0-550/0-2,000/min.
Impact Rate: 0-9,350/34,000/bpm.
Max Torque: 27/70Nm, 15 Settings.
Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.
1 x 18 Volt DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.
Bit Holder: 6.35mm (1/4in).
No Load Speed: 0-850/0-2,100/0-3,000/min.
Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.
Max Torque: 26/80/203Nm.
1 x 18 Volt DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades' class='desclinks'>blades and attachments to be changed quickly without the use of tools.
No Load Speed: 0-20,000/min.
1 x DCG412M2 XR 18 Volt 125mm Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.
No Load Speed: 7,000/min.
Disc Diameter: 125mm, M14 Spindle.
1 x DCS391 18 Volt 165mm Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change.
No Load Speed: 3,700/min.
Max Cutting Depth: @90°: 55mm, @45°: 42.1mm.
Blade: 165 x 20mm Bore.
1 x DCH273P2 18 Volt Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.
Modes: Rotary, SDS Hammer, Chisel Only.
No Load Speed: 0-1,100/min.
Impact Rate: 0-4,600/bpm.
Impact Energy: 2.1 Joules.
Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mm
Also supplied with: 3 x 18 Volt 5.0Ah Slide Pack Batteries, 1 x Multi-Voltage Charger, 2 x TSTAK™ VI Kitboxes, 1 x TSTAK™ II Kitbox and 1 x TSTAK™ Carrier.