Specifications-
Supplied with extra 1/2 inch bearing for removing the lower quirk.
Dimensions:
C=11/16 inch
C=17.5 mm
B=9.5 mm
B2=12.7 mm
R=6...More Info
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=1 1/32 inch D=26 mm D2=22 mm C=5/8 inc...More Info
For use in a router table only. Take 5 - 6 passes, increasing the depth with each pass. Dimensions: D=86 mm C=1/2 inch C=12.7 mm B=12.7 mm A=15 degree...More Info
Features-Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. This cutter is designed for use with the seal in a wipi...More Info
For use in router tables where there is a limited router cutters shank length available.
Precision machined one-piece steel body.
With a 12mm shan...More Info
For use in router tables where there is a limited router cutters shank length available.
Precision machined one-piece steel body.
With a 1/2 inc...More Info
For use in router tables where there is a limited router cutters shank length available.
Precision machined one-piece steel body.
With a 1/2 inc...More Info
For use in router tables where there is a limited router cutters shank length available.
Precision machined one-piece steel body.
With a 12mm sh...More Info
The new size has an 8mm shank and 1/4 inch collet, and should be used with medium duty routers of minimum 850 watts, use at maximum speed 18000 RPM an...More Info
The new size has an 8mm shank and 1/4 inch collet, and should be used with medium duty routers of minimum 850 watts, use at maximum speed 18000 RPM an...More Info
Collar Packs are used for cutters with shank mounted bearings.
Packs include one collar, grub screw and hex key.
Dimensions:
ID=1/2 inch
OD=18...More Info
Collar Packs are used for cutters with shank mounted bearings. Packs include one collar, grub screw and hex key.
Dimensions:
ID=1/4 inch
OD=11 ...More Info
Collar Packs are used for cutters with shank mounted bearings. Packs include one collar, grub screw and hex key.
Dimensions:
ID=8mm
OD=14mm
Hex...More Info
A 9.5mm diameter stepped high speed steel drill. Supplied with depth setting collar.
Dimensions:
Diameter=9.5 mm
Quick change shank
Diameter M...More Info
Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians.
A 250mm diameter opening can be cut and made goo...More Info
Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians.
A 250mm diameter opening can be cut and made goo...More Info
Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians.
A 250mm diameter opening can be cut and made goo...More Info
Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians.
A 250mm diameter opening can be cut and made goo...More Info
Replacement cutter for use on 18mm floor thickness.
Dimensions:
Shank Diameter=1/4 inch
For use on 18mm floor thickness
Shank Diameter: 1/4
...More Info