Trend at MTS Power Tools

Categories

Browse By Brand

Trend

The Trend name is synonymous with routing. Trend were the original importers of the legendery ELU router brand, famous for such models as the MOF96, MOF96E and MOF177 E. Dewalt purchased the ELU company and launched their own range of routers such as the DW615 and DW625 E plunge routers. The Trend T10 and T11 routers are based on the DW625https://www.mtspowertools.co.uk/product.php/section//sn/DEW625EK

TREND C117CX1/4TC GUIDED TRIMMER 18.2MM X 14MM

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=18.2 mm C=14 mm Ol=54 mm B=18.2 mm Shank Diame... More Info

£27.84 INC VAT

TREND C117X1/4TC GUIDED TRIMMER 15.9MM DIA

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=5/8 inch D=15.9 mm C=5/8 inch C=15.9 mm B=15.9... More Info

£28.18 INC VAT

TREND C119AX1/4TC GUIDED BEVEL 7 DEG TRIPLE FLUTE

This is bearing guided and gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. Dimensions: D=15.1 mm ... More Info

£41.83 INC VAT

TREND C119BX1/4TC GUIDED BEVEL TRIM A=75 X 15.9MM DIA

Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. 1/4" shank 75¡ bearing guided laminate trimmer... More Info

£24.12 INC VAT

TREND C119X1/4TC S/GUIDED BEVEL TRIM A=65¡

This is bearing guided and gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. Dimensions: C=1/4 inch... More Info

£21.76 INC VAT

TREND C120AX1/2TC SLAT WALL CUTTER 30MM DIA X 15MMCUT

A 'T' slot cutters for clamping and hanging applications. Relief cut required. MEC mechanical feed only. Dimensions: D=30 mm D2=10.5 mm C=7 mm... More Info

£63.88 INC VAT

TREND C120X1/4TC KEYHOLE 9.5MM DIA

For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. For No8 & No1... More Info

£28.18 INC VAT

TREND C121AX8MMTC TEMPLATE/PROFILE 16.0MM DIA

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cut... More Info

£33.68 INC VAT

TREND C121BX1/4TC PROFILER 12.7MM X 9.5MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutte... More Info

£27.64 INC VAT

TREND C121CX1/4TC PROFILER 16MM DIA X 25MM

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutt... More Info

£39.91 INC VAT

TREND C121DX1/4TC PROFILER 12.7MM DIA X 32MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutt... More Info

£30.52 INC VAT

TREND C121EX1/4TC PROFILER 15.9MM DIA X 12.7MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutt... More Info

£28.17 INC VAT

TREND C121FX1/4TC GUIDED PROFILER 12.7MM X 12.7MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutte... More Info

£30.32 INC VAT

TREND C121GX1/4TC GUIDED PROFILER 9.5MM X 6.35MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutte... More Info

£19.38 INC VAT

TREND C121HX1/4TC GUIDED PROFILER 9.5MM X 12.7MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutte... More Info

£24.66 INC VAT

TREND C121KX1/4TC PROFILER 12.7MM X 4MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutte... More Info

£23.43 INC VAT

TREND C121NX1/4TC PROFILER 12.7MM X 6.35MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutte... More Info

£26.95 INC VAT

TREND C121PX1/4TC GUIDED PROFILER 9.5MM X 25MM CUT

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutte... More Info

£38.16 INC VAT

TREND C121X1/4TC TEMPLATE/PROFILE 12.7MM DIA

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter ... More Info

£27.32 INC VAT

TREND C122X1/4TC CAVETTO 7.9MM RAD X 15.9MM CUT

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius. Dimensions: C=5/8 inch C=15.9 mm B=12.7 mm R=7.9 ... More Info

£59.10 INC VAT

TREND C123X1/4TC TEMPLATE/PROFILE 19.1MM DIA

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cut... More Info

£35.44 INC VAT

TREND C124X1/4TC STRAIGHT 12.7MM DIA X 12.7MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood an... More Info

£15.56 INC VAT

TREND C125X1/4TC STRAIGHT 15.9MM DIA X 12.7MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood an... More Info

£17.28 INC VAT

TREND C126X1/4TC ROUND/OVER 4.8MM RAD X 12.7MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=1/2 inch D=12.7 mm C=23/64 inch C=9 mm R=4.8 mm Sh... More Info

£24.52 INC VAT

TREND C127X1/4TC ROUND/OVER 6.3MM RAD X 15.9MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=5/8 inch D=15.9 mm C=13.5 mm R=6.3 mm Shank Diamet... More Info

£26.46 INC VAT

TREND C128X1/4TC ROUND/OVER 9.5MM RAD X 22.2MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=7/8 inch D=22.2 mm C=19/32 inch C=15 mm R=9.5 mm S... More Info

£30.94 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143]

Terms & Conditions