.
.
 
Search
 
Trend
147 items are stocked by MTS Power Tools

The Trend name is synonymous with routing. Trend were the original importers of the legendery ELU router brand, famous for such models as the MOF96, MOF96E and MOF177 E. Dewalt purchased the ELU company and launched their own range of routers such as the DW615 and DW625 E plunge routers. The Trend T10 and T11 routers are based on the DW625https://www.mtspowertools.co.uk/product.php/section//sn/DEW625EK

TREND C125X1/4TC STRAIGHT 15.9MM DIA X 12.7MM CUT
TREND C125X1/4TC STRAIGHT 15.9MM DIA X 12.7MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood an... More Info

£17.28 INC VAT
TREND C126X1/4TC ROUND/OVER 4.8MM RAD X 12.7MM CUT
TREND C126X1/4TC ROUND/OVER 4.8MM RAD X 12.7MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=1/2 inch D=12.7 mm C=23/64 inch C=9 mm R=4.8 mm Sh... More Info

£24.52 INC VAT
TREND C127X1/4TC ROUND/OVER 6.3MM RAD X 15.9MM CUT
TREND C127X1/4TC ROUND/OVER 6.3MM RAD X 15.9MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=5/8 inch D=15.9 mm C=13.5 mm R=6.3 mm Shank Diamet... More Info

£26.46 INC VAT
TREND C128X1/4TC ROUND/OVER 9.5MM RAD X 22.2MM CUT
TREND C128X1/4TC ROUND/OVER 9.5MM RAD X 22.2MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=7/8 inch D=22.2 mm C=19/32 inch C=15 mm R=9.5 mm S... More Info

£30.94 INC VAT
TREND C130X1/4TC CORNER BEAD 4.8MM RAD X 26MM DIA
TREND C130X1/4TC CORNER BEAD 4.8MM RAD X 26MM DIA

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=1 1/32 inch D=26 mm D2=22 mm C=5/8 ... More Info

£59.10 INC VAT
TREND C130X8MMTC CORNER BEAD 4.8MM RAD X 26MM DIA 8MM SHANK
TREND C130X8MMTC CORNER BEAD 4.8MM RAD X 26MM DIA 8MM SHANK

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=1 1/32 inch D=26 mm D2=22 mm C=5/8 inc... More Info

£20.00 INC VAT
TREND C131X1/4TC BROKEN OGEE 2.4MM RAD X 10MM CUT
TREND C131X1/4TC BROKEN OGEE 2.4MM RAD X 10MM CUT

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm C=25/64... More Info

£59.10 INC VAT
TREND C131X8MMTC BROKEN OGEE 2.4MM RAD X 10MM CUT
TREND C131X8MMTC BROKEN OGEE 2.4MM RAD X 10MM CUT

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm C=25/64... More Info

£59.10 INC VAT
TREND C133X1/4TC OVERLAP TRIM 12.7MM DIA
TREND C133X1/4TC OVERLAP TRIM 12.7MM DIA

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim. Dimensions: D=1/2 inch D=12.7 mm C=1 inch C=25.4 mm B=19.1 mm E=3.2 mm ... More Info

£38.20 INC VAT
TREND C133X8MMTC OVERLAP TRIM 12.7MM DIA
TREND C133X8MMTC OVERLAP TRIM 12.7MM DIA

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim. Dimensions: D=1/2 inch D=12.7 mm C=1 inch C=25.4 mm B=19.1 mm E=3.2 mm ... More Info

£38.20 INC VAT
TREND C134X1/4TC THREE FLUTE TRIM 12.7MM DIA
TREND C134X1/4TC THREE FLUTE TRIM 12.7MM DIA

Three flute self-guiding for extra fine trimming of laminate or plywood overlay. Dimensions: D=1/2 inch D=12.7 mm C=1/2 inch C=12.7 mm B=12.7 mm A=90... More Info

£24.52 INC VAT
TREND C135AX1/2TC PIERCE & TRIM 12.7MM DIA TWO FLUTE
TREND C135AX1/2TC PIERCE & TRIM 12.7MM DIA TWO FLUTE

Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Dimensions: D=12.7 mm D=1/2 inch C=30 mm OL=85 mm Shank D... More Info

£41.96 INC VAT
TREND C135X8MMTC PIERCE/TRIM 6.3MM DIA X 18MM CUT
TREND C135X8MMTC PIERCE/TRIM 6.3MM DIA X 18MM CUT

Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Dimensions: D=1/4 inch D=6.3 mm C=45/64 inch C=18 mm Shan... More Info

£24.52 INC VAT
TREND C138AX1/4TC GUIDED BEVEL 60 DEG X 34.9MM DIA
TREND C138AX1/4TC GUIDED BEVEL 60 DEG X 34.9MM DIA

Ideal for posts and newel caps for stairs. Dimensions: D1=34.9 mm C=20.6 mm B=12.7 mm A=60 degrees Shank Diameter=1/4 inches Shank Diameter: 1/4 ... More Info

£46.26 INC VAT
TREND C138BX1/4TC GUIDED BEVEL 67.5 DEG X 30.9MM DIA
TREND C138BX1/4TC GUIDED BEVEL 67.5 DEG X 30.9MM DIA

Ideal for posts and newel caps for stairs. Dimensions: D1=30.9 mm C=22 mm B=12.7 mm A=67.5 degrees Shank Diameter=1/4 inches Shank Diameter: 1/4 ... More Info

£46.26 INC VAT
TREND C138CX1/4TC GUIDED BEVEL 75 DEG X 22.9MM DIA
TREND C138CX1/4TC GUIDED BEVEL 75 DEG X 22.9MM DIA

Ideal for posts and newel caps for stairs. Dimensions: D1=22.9 mm C=19.1 mm B=12.7 mm A=70 degrees Shank Diameter=1/4 inches Shank Diameter: 1/4 ... More Info

£46.26 INC VAT
TREND C138X1/4TC SELF G/CHAMFER 60 DEG X 12.7MM CUT
TREND C138X1/4TC SELF G/CHAMFER 60 DEG X 12.7MM CUT

Ideal for posts and newel caps for stairs. Dimensions: C=1/2 inch C=12.7 mm B=9.5 mm A=60 degrees Shank Diameter=1/4 inch Shank Diameter: 1/4 Grad... More Info

£38.20 INC VAT
TREND C139X1/4TC SELF G/CHAMFER 30 DEG X 7.0MM CUT
TREND C139X1/4TC SELF G/CHAMFER 30 DEG X 7.0MM CUT

Ideal for posts and newel caps for stairs. Dimensions: C=9/32 inch C=7 mm B=9.5 mm A=30 degrees Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade:... More Info

£43.56 INC VAT
TREND C140X1/4TC CORNER BEAD 3.2MM RAD
TREND C140X1/4TC CORNER BEAD 3.2MM RAD

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=7/8 inch D=22.3 mm D2=20 mm C=35/64 ... More Info

£53.60 INC VAT
TREND C141X1/4TC PANEL/VEINING 4.8MM RAD
TREND C141X1/4TC PANEL/VEINING 4.8MM RAD

For decorative panel and veining work. Ideal for carving with the Routerlathe. Dimensions: D=3/8 inch D=9.5 mm C=7.5 mm R=4.8 mm Shank Dia... More Info

£31.80 INC VAT
TREND C142X1/4TC OGEE MOULD 7.5MM RAD X 27MM DIA
TREND C142X1/4TC OGEE MOULD 7.5MM RAD X 27MM DIA

For panel and veining work. Ideal for barley twists using the Routerlathe. Dimensions: D=1 1/16 inch D=27 mm C=5/8 inch C=16 mm R=7.5 mm Shank Diamet... More Info

£59.10 INC VAT
TREND C143AX8MMTC LOTTING 3.0MM CUT X 31.8MM DIA
TREND C143AX8MMTC LOTTING 3.0MM CUT X 31.8MM DIA

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£31.80 INC VAT
TREND C143BX1/4TC SLOTTING 2MM KERF X 31.8MM DIA
TREND C143BX1/4TC SLOTTING 2MM KERF X 31.8MM DIA

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£29.08 INC VAT
TREND C143X1/4TC SLOTTING 3.2MM CUT
TREND C143X1/4TC SLOTTING 3.2MM CUT

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£31.80 INC VAT
TREND C144AX8MMTC SLOTTING 4.0MM CUT X 31.8MM DIA
TREND C144AX8MMTC SLOTTING 4.0MM CUT X 31.8MM DIA

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£31.80 INC VAT
TREND C144X1/4TC SLOTTING 4.7MM CUT
TREND C144X1/4TC SLOTTING 4.7MM CUT

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with ev... More Info

£31.80 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143][144]
 
Terms & Conditions