Trend at MTS Power Tools

Categories

Browse By Brand

Trend

The Trend name is synonymous with routing. Trend were the original importers of the legendery ELU router brand, famous for such models as the MOF96, MOF96E and MOF177 E. Dewalt purchased the ELU company and launched their own range of routers such as the DW615 and DW625 E plunge routers. The Trend T10 and T11 routers are based on the DW625https://www.mtspowertools.co.uk/product.php/section//sn/DEW625EK

TREND 11/1X1/2TC BEVEL CUTTER 30DEG X 21.5MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£49.08 INC VAT

TREND 11/1X1/4TC CHAMFER V GROOVE A=30¡ X 21.5MM

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£49.08 INC VAT

TREND 11/20X1/4TC PANEL MOULD A=60¡ X 12.7MM DIA

Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approx. 1.0mm flat will be found on nose. Dimensions: D=1/2 inch... More Info

£52.72 INC VAT

TREND 11/2X1/2TC V GROOVE 45 DEG X 9.5MM DIA

Use for bevelling and chamfering. A flat, approximately 1.0mm, will be found on V Groove tip. Ref. 11/3 is ideal for imitating 'V' jointed tongue ... More Info

£41.46 INC VAT

TREND 11/2X1/4TC V GROOVE 45 DEG X 9.5MM DIA

Use for bevelling and chamfering. A flat, approximately 1.0mm, will be found on V Groove tip. Ref. 11/3 is ideal for imitating 'V' jointed tongue ... More Info

£47.20 INC VAT

TREND 11/30X1/2TC CHAMFER V GROOVE A=45* X 25.4MM

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£74.06 INC VAT

TREND 11/30X1/4TC CHAMFER V GROOVE A=45¡ X 25.4MM

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£77.80 INC VAT

TREND 11/31X1/2TC V GROOVE 45 DEG X 12.7MM DIA

Use for bevelling and chamfering. A flat, approximately 1.0mm, will be found on V Groove tip. Ref. 11/3 is ideal for imitating 'V' jointed tongue ... More Info

£31.92 INC VAT

TREND 11/31X1/4TC V GROOVE 45 DEG X 12.7MM DIA

Use for bevelling and chamfering. A flat, approximately 1.0mm, will be found on V Groove tip. Ref. 11/3 is ideal for imitating 'V' jointed tongue ... More Info

£31.92 INC VAT

TREND 11/32X1/2TC V GROOVE 45 DEG X 16MM DIA

Use for bevelling and chamfering. A flat, approximately 1.0mm, will be found on V Groove tip. Ref. 11/3 is ideal for imitating 'V' jointed tongue ... More Info

£34.21 INC VAT

TREND 11/32X1/4TC V GROOVE 45 DEG X 16MM DIA

Use for bevelling and chamfering. A flat, approximately 1.0mm, will be found on V Groove tip. Ref. 11/3 is ideal for imitating 'V' jointed tongue ... More Info

£34.21 INC VAT

TREND 11/3X1/2TC CHAMFER CUTTER 45DEG X19.1MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£40.96 INC VAT

TREND 11/3X1/4TC CHAMFER V GROOVE A=45¡X18MM 253349

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£40.96 INC VAT

$TREND 11/3X8MMTC CHAMFER \$

TREND 11/3X8MMTC CHAMFER 'V' GROOVE A=45¡ X 18MM

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£40.96 INC VAT

TREND 11/40X1/4TC PANEL MOULD A=45¡ X 12.7MM DIA

Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approx. 1.0mm flat will be found on nose. Dimensions: D=1/2 inch... More Info

£46.32 INC VAT

$TREND 11/41X1/2TC 45\$

TREND 11/41X1/2TC 45' V Groove Top Bearing Guided TCT Cutter 1/2" Shank

1/2" Shank 45' V Groove 19.1mm Dia. Shank mounted guide bearing ... More Info

£9.95 INC VAT

TREND 11/50X1/4TC PANEL MOULD 4.0 RADX13MM DIA 257109

Ideal for edge of drawer fronts and cabinet doors. Dimensions: D=13 mm D2=1.2 mm C=12 mm R=4 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade:... More Info

£41.52 INC VAT

TREND 11/5X1/2TC BEVEL CUTTER 60DEG X 12.7MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£38.20 INC VAT

$TREND 11/5X1/4TC CHAMFER \$

TREND 11/5X1/4TC CHAMFER 'V' GROOVE A=60¡ 257084

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joi... More Info

£38.20 INC VAT

TREND 11/60X1/2TC BEVEL 32MM DIA X 25MM CUT

Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Tool Ref.... More Info

£110.80 INC VAT

TREND 12/03X1/4TC RADIUS CUTTER 1.6MM RAD

For coves and part of a rule joint. Dimensions: D=1/8 inch D=3.2 mm C=9.5 mm R=1/16 inch R=1.6 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grad... More Info

£39.04 INC VAT

TREND 12/05X1/4TC RADIUS CUTTER 2.4MM RAD X 11MM CUT

For coves and part of a rule joint. Dimensions: D=4.8 mm C=7/16 inch C=11 mm R=3/32 inch R=2.4 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grad... More Info

£41.84 INC VAT

TREND 12/31X1/4TC RADIUS CUTTER 3.2MM RAD X 11MM CUT

For coves and part of a rule joint. Dimensions: D=6.4 mm C=7/16 inch C=11.0 mm R=1/8 inch R=3.2 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Gra... More Info

£44.60 INC VAT

TREND 12/3X1/4TC RADIUS CUTTER 3MM RAD 257090

For coves and part of a rule joint. Dimensions: D=6 mm C=15 mm R=3 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade: TCT Diameter Metric: 6 ... More Info

£44.16 INC VAT

TREND 12/4X1/4TC RADIUS CUTTER 4.0MM RAD X 12.7MM C

For coves and part of a rule joint. Dimensions: D=8 mm C=1/2 inch C=12.7 mm R=4 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade: TCT Diamete... More Info

£46.32 INC VAT

TREND 12/5X1/4TC RADIUS 5MM RAD & 18MM CUT 253350

For coves and part of a rule joint. Dimensions: D=10 mm C=18 mm R=5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade: TCT Diameter Metric: 10... More Info

£49.08 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143][144]

Terms & Conditions