.
.
 
Search
 
Capilliary & Drawer Pull
Trend Routing > Router Cutters > Capilliary & Drawer Pull
  Returned 8 Results
TREND 84/83X1/2TC DRAWER PULL RAD 12.5MM RAD
TREND 84/83X1/2TC DRAWER PULL RAD 12.5MM RAD

The long cut depth of these cutters allows them to produce under-cut finger grooves. Dimensions: D=25 mm C=32 mm R=12.5 mm Shank Diameter=1/2 inch ... More Info

£96.92 INC VAT
TREND 84/92X1/2TC DRAWER PULL 3.5MM R1 X 6.3MM R2
TREND 84/92X1/2TC DRAWER PULL 3.5MM R1 X 6.3MM R2

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=44.8 mm D2=24 mm C=25.4 mm R=8 mm R2=2 mm Shank Di... More Info

£138.50 INC VAT
TREND 84/93X1/2TC DRAWER PULL 2MM R1 X 4MM R2
TREND 84/93X1/2TC DRAWER PULL 2MM R1 X 4MM R2

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=45 mm D2=24 mm C=22 mm R=5 mm R2=2 mm Shank Diamet... More Info

£152.36 INC VAT
TREND 84/94X1/4TC DRAWER PULL 4MM RAD X 19MM DIA
TREND 84/94X1/4TC DRAWER PULL 4MM RAD X 19MM DIA

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=19 mm C=13 mm R=4 mm Shank Diameter=1/4 inch Sha... More Info

£110.80 INC VAT
TREND 84/95X1/2TC DRAWER PULL 6.3MM RAD X 38MM DIA
TREND 84/95X1/2TC DRAWER PULL 6.3MM RAD X 38MM DIA

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=38 mm D2=22 mm C=17 mm R=6 mm Shank Diameter=1/2 i... More Info

£124.64 INC VAT
TREND 84/96X1/2TC DRAWER PULL 2.5MM RAD X 22MM DIA
TREND 84/96X1/2TC DRAWER PULL 2.5MM RAD X 22MM DIA

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=22 mm C=17 mm R=1.5 mm R2=2 mm Shank Diameter=1/2 ... More Info

£110.80 INC VAT
TREND C281X1/2TC DRAWER PULL 6MM 38MM DIA
TREND C281X1/2TC DRAWER PULL 6MM 38MM DIA

An initial cut with a straight cutter is required to produce the drawer pull profile. 1/2" shank 38mm diameter drawer pull twin flute TCT cutter.... More Info

£84.84 INC VAT
TREND C282X1/2TC DRAWER PULL 2MM R1 X 4MM R2
TREND C282X1/2TC DRAWER PULL 2MM R1 X 4MM R2

An initial cut with a straight cutter is required to produce the drawer pull profile. 1/2" shank 45mm diameter drawer pull twin flute TCT cutter.... More Info

£104.44 INC VAT
 
Terms & Conditions