Ideal for producing nosings and attractive edges.
Dimensions:
D=35.2 mm
C=35 mm
B=16 mm
R=9.5 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Grade...More Info
Ideal for producing nosings and attractive edges.
Dimensions:
D=44.8 mm
C=41 mm
B=19 mm
R=12.7 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Gra...More Info
Cutters with guide bearing reduce setting up time for curved workpieces.
Dimensions:
D=20.7 mm
B=12.7 mm
R=4 mm
Shank Diameter=1/4 inch
Shank Diame...More Info
Cutters with guide bearing reduce setting up time for curved workpieces.
Dimensions:
D=24.7 mm
B=12.7 mm
R=6 mm
Shank Diameter=1/4 inch
Shank Diame...More Info
For creating a concave radius or cove in the edge of furniture and columns.
Dimensions:
D=3/4 inch
D=19.1 mm
C=6.4 mm
B=12.7 mm
OL=61.0 mm
R=3.2 mm
S...More Info
For creating a concave radius or cove in the edge of furniture and columns.
Dimensions:
D=57/64 inch
D=22.7 mm
C=25/64 inch
C=10 mm
B=12.7mm
OL=61 mm...More Info
Gives a narrow appearance to a board edge.
Dimensions:
D=22 mm
C=10 mm
R=3 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Grade: TCT
Diameter Met...More Info
This quarter radius can produce a sunk bead or a nosing mould. Requires a side fence for guidance.
Dimensions:
D=25 mm
C=20 mm
R=13 mm
Shank Diamete...More Info
Concave beads or radiused bottomed grooves.
Useful for making drip grooves.
Dimensions:
D=30 mm
C=10 mm
R=5 mm
Shank Diameter=1/2 inch
Shank Diame...More Info
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Dimensions:
D=19 mm
C=6 mm
C2=22 mm
R=3 mm
Shank Diameter=1/...More Info
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Dimensions:
D=24 mm
C=10 mm
C2=28 mm
R=5 mm
Shank Diameter=1...More Info
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Dimensions:
D=60.2 mm
C=38 mm
C2=50.8 mm
R=19 mm
Shank Diame...More Info
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Dimensions:
D=25 mm
C=12 mm
C2=26 mm
R=6 mm
Shank Diameter=1...More Info
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Dimensions:
D=25 mm
C=12 mm
C2=26 mm
R=6 mm
Shank Diameter=1...More Info
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Dimensions:
D=33 mm
C=20 mm
C2=35 mm
R=10 mm
Shank Diameter=...More Info
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Dimensions:
D=42.9 mm
C=25.4 mm
C2=40 mm
R=12.7 mm
Shank Dia...More Info
Beads Refs. 9/10 & 9/11 have matching cutters Refs. 8/10 & 8/11 for jointing & hinging.
Dimensions:
D=50.8 mm
C=32 mm
C2=51 mm
R=16 mm
Shank Diamete...More Info
By making a second pass at 90 degrees a full corner bead can be cut.
Dimensions:
D=23 mm
D2=20 mm
B=16 mm
R=2 mm
Shank Diameter=1/4 inch
Shank Diam...More Info
By making a second pass at 90 degrees a full corner bead can be cut.
Dimensions:
D=22 mm
D2=18.9 mm
B=12.7 mm
R=3.2 mm
Shank Diameter=1/4 inch
Shan...More Info
By making a second pass at 90 degrees a full corner bead can be cut.
Dimensions:
D=28 mm
D2=25.7 mm
B=16 mm
R=4.8 mm
Shank Diameter=1/2 inch
Shank ...More Info
By making a second pass at 90 degrees a full corner bead can be cut.
Dimensions:
D=28 mm
D2=25.7 mm
B=16 mm
R=4.8 mm
Shank Diameter=1/4 inch
Shank ...More Info
By making a second pass at 90 degrees a full corner bead can be cut.
Dimensions:
D=31.9 mm
D2=28.6 mm
B=16 mm
R=7 mm
Shank Diameter=1/2 inch
Shank ...More Info
By making a second pass at 90 degrees a full corner bead can be cut.
Dimensions:
D=31.9 mm
D2=28.6 mm
B=16 mm
R=7 mm
Shank Diameter=1/4 inch
Shank ...More Info
By making a second pass at 90 degrees a full corner bead can be cut.
Dimensions:
D=38.1 mm
D2=34.7 mm
B=16 mm
R=9.5 mm
Shank Diameter=1/2 inch
Shank...More Info
With plunge cut these cutters can be used to cut and mould hand holes in stool seats.
Dimensions:
D=32 mm
C=25 mm
C2=45 mm
R=15 mm
Shank Diameter...More Info
Can be used to make single, double or corner beads.
Dimensions:
D=22 mm
C=16 mm
B=16 mm
R=3 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Grade: ...More Info
This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled.
Dimensions:
D=22...More Info
With plunge cut these cutters can be used to cut and mould hand holes in stool seats.
Dimensions:
D=32 mm
C=28mm
C2=48.0 mm
R=17.5 mm
Shank Diame...More Info
A double sunk bead with bearings fitted onto both shank and cutter, will create very attractive corner mouldings.
Dimensions:
D=25 mm
C=22 mm
B=16 m...More Info
With plunge cut these cutters can be used to cut and mould hand holes in stool seats.
Dimensions:
D=22 mm
C=35 mm
R=18 mm
Shank Diameter=1/2 inch...More Info
These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Ref. C068 can be used with Ref. C181 for dust proof joints.
...More Info
These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Ref. C068 can be used with Ref. C181 for dust proof joints.
...More Info
These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Ref. C068 can be used with Ref. C181 for dust proof joints.
...More Info
These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Ref. C068 can be used with Ref. C181 for dust proof joints.
...More Info
Attractive edge moulds. A full corner bead
can be produced by making a second pass at 90 degrees.
Dimensions:
D=1 1/32 inch
D=26 mm
D2=22 mm
C=5/8 ...More Info
Attractive edge moulds.
A full corner bead can be produced by making a second pass at 90 degrees.
Dimensions:
D=7/8 inch
D=22.3 mm
D2=20 mm
C=35/64 ...More Info
Attractive edge moulds. A full corner bead
can be produced by making a second pass at 90 degrees.
Dimensions:
D=31.9 mm
D2=28.6 mm
C=22.5 mm
B=16 mm...More Info
Attractive edge moulds. A full corner bead
can be produced by making a second pass at 90 degrees.
Dimensions:
D=31.9 mm
D2=28.6 mm
C=22.5 mm
B=16 mm...More Info
Attractive edge moulds. A full corner bead
can be produced by making a second pass at 90 degrees.
Dimensions:
D=38.1 mm
D2=34.7 mm
C=26 mm
B=16 mm
R...More Info