Straight Cutters, Router Cutters, Trend Routing on MTS Power Tools

Categories

Browse By Brand

Straight Cutters

Trend Routing > Router Cutters > Straight Cutters

Returned 80 Results

TREND 12/3X8MMTC SINGLE FLUTE COVE 3.0MM RAD X 15MM

For coves and part of a rule joint. Dimensions: D=6 mm C=15 mm R=3 mm Shank Diameter=8 mm Shank Diameter: 8 mm Grade: TCT Diameter M... More Info

£32.18 INC VAT

TREND 2/01X1/4TC SINGLE FLUTE 1.5MM DIA X 6MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£22.94 INC VAT

TREND 2/02X1/4TC SINGLE FLUTE 1.8MM DIA X 6MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£24.96 INC VAT

TREND 2/06X1/4TC SINGLE FLUTE 6.3MM DIA X 12.7MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£26.20 INC VAT

TREND 2/07LX3/8TC POCKET 9.5MM DIA X 32MM CUT

A single flute cutters with extra long shanks. All the single flute tools have recessed shanks to allow deeper cutting. Deep grooving, rebating ... More Info

£31.24 INC VAT

TREND 2/0X1/4TC SINGLE FLUTE 1.0MM DIA X 3MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£19.70 INC VAT

TREND 2/0X8MMTC SINGLE FLUTE 1.0MM DIA X 3MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£19.70 INC VAT

TREND 2/10X1/4TC SINGLE FLUTE 2MM DIA X 5MM 257058

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£24.32 INC VAT

TREND 2/12X1/4TC SINGLE FLUTE 2.7MM DIA X 8MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£26.20 INC VAT

TREND 2/15X1/4TC SINGLE FLUTE 3MM DIA X 11MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£27.56 INC VAT

TREND 2/1X1/4TC SINGLE FLUTE 1.6MM DIA X 5MM 257057

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£28.18 INC VAT

TREND 2/2X1/4TC SINGLE FLUTE 3.2MM DIA X 8MM 253330

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£26.20 INC VAT

TREND 2/3X1/2TC SINGLE FLUTE 4MM DIA X 9MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£20.32 INC VAT

TREND 2/3X1/4HSS SINGLE FLUTE 4MM DIA X 9MM 257061

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will g... More Info

£9.10 INC VAT

TREND 2/3X1/4TC SINGLE FLUTE 4MM DIA X 11MM 257062

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£20.32 INC VAT

TREND 2/40X1/2TC SINGLE FLUTE 4.8MM DIA X 19MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£40.68 INC VAT

TREND 2/45X1/4TC SINGLE FLUTE 5MM DIA X 19MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£33.44 INC VAT

TREND 2/4X1/4TC SINGLE FLUTE 4.8 DIA X11MM 253331

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£26.94 INC VAT

TREND 2/5X1/4TC SINGLE FLUTE 5.5MM DIA X 19MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£35.42 INC VAT

TREND 2/61X1/4TC SINGLE FLUTE 6.3MM DIA X 25MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£30.20 INC VAT

TREND 2/62X1/4TC SINGLE FLUTE 7MM DIA X 19MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£33.76 INC VAT

TREND 2/63X1/2TC SINGLE FLUTE 7.9MM DIA X 25MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£29.56 INC VAT

TREND 2/6X1/2TC SINGLE FLUTE 6.3MM DIA X 19MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£22.32 INC VAT

TREND 2/6X1/4HSS SINGLE FLUTE 6.3 DIA X 19MM 253301

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will g... More Info

£9.10 INC VAT

TREND 2/6X1/4TC SINGLE FLUTE 6.3 DIA X 19MM 253332

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£22.32 INC VAT

TREND 2/7X1/2TC SINGLE FLUTE 9.5MM DIA X 25MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£28.80 INC VAT

TREND 2/7X12MMTC SINGLE FLUTE 9.5MM DIA X 25MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£26.58 INC VAT

TREND 2/82X1/2TC SINGLE FLUTE 12.7MM DIA X 50MM CUT

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S... More Info

£45.28 INC VAT

TREND 3/04X1/4TC TWO FLUTE 2.5MM DIA X 8MM CUT

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All c... More Info

£20.96 INC VAT

TREND 3/06X1/4TC TWO FLUTE 2MM DIA X 5MM CUT

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All c... More Info

£24.32 INC VAT

TREND 3/06X8MMTC TWO FLUTE 2MM DIA X 6.5MM CUT

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All c... More Info

£24.32 INC VAT

TREND 3/83DX1/2TC D/E 12.7MM DIA X 50MM CUT 99MM OL

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All c... More Info

£36.16 INC VAT

TREND 3/83MX1/2TC D/E 12.7MM DIA X 50MM CUT 83MM OL

Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All c... More Info

£36.16 INC VAT

TREND 3/83X1/2TC D/E 12.7 DIA X 50MM 108MM OL 257049

TCT extra long cutter. Designed for hollow honeycomb board worktops. Two flutes give a clean finish to cut edges. Use only on professional routers w... More Info

£33.68 INC VAT

TREND 4/28X1/2TC TWO FLUTE 16MM DIA X 35MM CUT

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plung... More Info

£34.82 INC VAT

TREND 4/85X1/2TC TWO FLUTE 28MM DIA X 25MM CUT

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plung... More Info

£62.24 INC VAT

TREND 5/1X1/4TC HINGE RECESS 12.7MM DIA

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimmi... More Info

£24.96 INC VAT

TREND 53/30X1/2TC SHEAR 9.5MM DIA X 25MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£30.20 INC VAT

TREND 53/30X1/4TC SHEAR 9.5MM DIA X 25MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£28.18 INC VAT

TREND 53/30X8MMTC SHEAR 9.5MM DIA X 25MM CUT

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming ven... More Info

£28.18 INC VAT

TREND ABSS2/61X1/4STC ABS/PVC 6.3MM X 25MM SINGLE FLUTE

Used to slot and trim low melting point plastics such as ABS, Styrene and PVC. For maximum life these cutters are Solid Carbide. Single flute fo... More Info

£29.32 INC VAT

TREND ACR2/80X1/2TC ACRYLIC 12.7MM X 32MM SINGLE FLUTE

Single flute for fast cutting. Specially ground for cutting acrylic. Cutter ref ACR2/80 can be used on phenolic resin. Dimensions: D=1/2 inc... More Info

£39.30 INC VAT

TREND ACRS2/60X1/4STC ACRYLIC 6.3MM X 19MM SINGLE FLUTE

Single flute for fast cutting. Specially ground for cutting acrylic. Cutter ref ACR2/80 can be used on phenolic resin. Dimensions: D=1/4 inc... More Info

£50.48 INC VAT

TREND ACRS2/6X1/4STC ARYLIC 6.3MM X 10MM SINGLE FLUTE

Single flute for fast cutting. Specially ground for cutting acrylic. Cutter ref ACR2/80 can be used on phenolic resin. Dimensions: D=1/4 inc... More Info

£48.68 INC VAT

TREND C034AX1/4TC SINGLE FLUTE 2.0MM DIA X 5MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£13.12 INC VAT

TREND C034BX1/4TC SINGLE FLUTE 1.5MM DIA X 6MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£15.54 INC VAT

TREND C034CX1/4TC SINGLE FLUTE 3MM DIA X 11MM CUT

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more impor... More Info

£16.71 INC VAT

TREND DH/01X1/4TC SINGLE FLUTE 1.6MM DIA X 5MM CUT

One flute straight cutter from the Dolls house cutter set. Dimensions: D=1.6 mm C=5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade: ... More Info

£20.96 INC VAT

TREND DH/02X1/4TC SINGLE FLUTE 2MM DIA X 5MM CUT

One flute straight cutter from the Dolls house cutter set. Dimensions: D=2 mm C=5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade: TC... More Info

£20.96 INC VAT

TREND S2/60X1/4STC SINGLE FLUTE 6.3MM DIA X 19MM CUT

Greater duribility. Better plunge characteristics. Single flute - faster feed rates. Single flute cutters should not be used in eccentric chucks. ... More Info

£49.58 INC VAT

TREND S2/6X1/4STC SINGLE FLUTE 6.3MM DIA X 10MM CUT

Greater duribility. Better plunge characteristics. Single flute - faster feed rates. Single flute cutters should not be used in eccentric chucks. ... More Info

£47.70 INC VAT

TREND S3/12X1/4STC TWO FLUTE 6.3MM DIA X 11MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=11 mm OL=51 mm Shank Diameter... More Info

£44.00 INC VAT

TREND S3/21X1/4STC TWO FLUTE 6.3MM DIA X 28MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=28 mm OL=63 mm Shank Diameter... More Info

£52.38 INC VAT

TREND S3/22X1/4STC TWO FLUTE 6.3MM DIA X 25MM 253336

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=25 mm OL=50 mm Shank Diameter... More Info

£44.00 INC VAT

TREND S3/50X3/8STC TWO FLUTE 9.5MM DIA X 25MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=3/8 inch D=9.5 mm C=25 mm OL=63 mm Shank Diameter... More Info

£78.04 INC VAT

TREND S3/81X1/2STC TWO FLUTE 12.7MM DIA X 32MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/2 inch D=12.7 mm C=32 mm OL=77 mm Shank Diamete... More Info

£112.82 INC VAT