For coves and part of a rule joint.
Dimensions:
D=6 mm
C=15 mm
R=3 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Grade: TCT
Diameter Metric: 6
...More Info
For coves and part of a rule joint.
Dimensions:
D=8 mm
C=1/2 inch
C=12.7 mm
R=4 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Grade: TCT
Diamete...More Info
Tungsten Carbide Tipped.
Two flute cutter with tips sheared up and down, giving a fine finish.
For trimming veneered and double-faced boards, plywoo...More Info
A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=3/8 inch
D=9.5 mm
C=7.5 mm
R=4.8 mm
Shank Diamet...More Info
A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=13 mm
C=12.5 mm
R=6 mm
Shank Diameter=1/4 inch
...More Info
A range of small sized panelling cutters. Ideal for veining and fluting applications.
Dimensions:
D=14.5 mm
C=19.5 mm
R=7.5 mm
Shank Diameter=1/4 in...More Info
Shape similar to Ref. 18/80.
Suitable panel mould for use with Ref. PSC/5 & PSC/50.
8mm shank tools are for use with medium and heavy duty r...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S...More Info
A single flute cutters with extra long shank.
Deep grooving, rebating and mortising.
Useful for template work when thickness of template restric...More Info
Trend Craft Pro Dovetail Cutters are designed for use with commercial dovetailing and stair housing jigs. They are also used to produce sliding and la...More Info
Bearing guided tool to rout stepped groove for espagonette lock recess.
Two flute for clean finish.
Dimensions:
D1=40.05 mm
Cut length=16.3/12.3...More Info
Bearing guided tool to rout multi-point lock systems in wooden doors.
Two flute for clean finish.
Use in conjunction with multi-point lock system cu...More Info
Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal.
The cutter is designed for use with the seal in a wiping mode a...More Info
Cutter Set Ref. 346 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider groo...More Info
Cutter Set Ref. 346 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider groo...More Info
Cutter Set Ref. 346 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider groo...More Info
A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No.8 & No.10 screw heads. Ref. 35/01 - No.10 & No.12 screw heads.
Not suitable ...More Info
A range of heavy duty 'T' slot cutters for clamping and hanging applications.
Relief cut required.
MEC mechanical feed only.
Dimensions:
D=30 mm...More Info
Cutter Set Ref. 346 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider groo...More Info
Four fluted cutter for routing tenons with a clean finish on the shoulder.
Tungsten Carbide Tipped for use on timber and abrasive man-made boards.
C...More Info