TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
TCT plunge ...More Info
The two bearings supplied offer the means of cutting different depths of mouldings.
Dimensions:
D=1 5/8 inch
D=41.3 mm
C=18 mm
B=9.5 mm
B2=12.7 mm
R=...More Info
The two bearings supplied offer the means of cutting different depths of mouldings.
Dimensions:
D=2 inches
D=50.8 mm
C=1 inch
C=25.4 mm
B=12.7 mm
B2=...More Info
The two bearings supplied offer the means of cutting different depths of mouldings.
Dimensions:
D=63.5 mm
C=1 inch
C=25.4 mm
B=12.7 mm
B2=16 mm
R=1 i...More Info
Popular rebate sets which include different size bearings for a choice of rebates.
Ease of setting-up and accurate depth of cut.
Ideal for rebating st...More Info
Four fluted TCT trimmer/profiler.
Super fine finish.
Ball bearings fitted to both nose and shank.
Allows templates to be placed either on top or the...More Info
Combination pierce and trim cutters.
Pierce and cut out apertures in laminate worktops.
Base of the cutter acting as a guide follower.
Dimensions:
D...More Info
Four fluted up-cut sprial router cutter for acrylic plastic (cast or extruded).
Can be used to trim, rebate and surface.
Can be used to ramp plung...More Info
A single fluted high steel cutter for pierce and trimming of aluminium faced panels in the caravan industry.
Dimensions:
D=6.3 mm
C=19.1 mm
OL=76 mm
...More Info
Can be used to make rule joints or glazing bar joints.
Dimensions:
D=30 mm
C=10 mm
R=10 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Grade: TCT
...More Info
V point through hole slow spiral TCT drills can be used in drilling machines or portable routers.
Tungsten Carbide Tipped for long life.
Router dril...More Info
Used to slot and trim low melting point plastics such as ABS, Styrene and PVC.
For maximum life these cutters are Solid Carbide.
Single flute for ...More Info
Used to slot and trim low melting point plastics such as ABS, Styrene and PVC.
For maximum life these cutters are Solid Carbide.
Two flute for fin...More Info
Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic resin.
Dimensions:
D=1/2 inch
D=12.7 ...More Info
Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic resin.
Dimensions:
D=1/4 inch
D=6.3 m...More Info