This combination mortice and marking gauge is made of sealed rosewood and has a brass pull slide to adjust the extra spur for use as a mortice gauge.A...More Info
This combination Mortice Marking Gauge is made of sealed rosewood incorporating brass facing strips.Knurled brass stock fixing screw and hardened stee...More Info
Features-
Multi-directional exhaust port directs exhaust air away from operator. rotatable 360 degrees by hand
Rubber Bumpers protect the surface of...More Info
Features-
Driving depth adjustment by dial
Anti-dry fire mechanism
Sequential and bump firing modes selectable by rocker switch
Bumper protects wo...More Info
The Monument 1515U Water Flow Weir Gauge is designed to measure water flow rates in order to determine if suitable flow is available in a building pri...More Info
Air testing U gauge kit containing all the items (except testing plugs) needed to carry out an air test to 4in/100mm water gauge pressure on any size ...More Info
U. gauge or Manometer.After installation or repairing of any drain or pipeline system it should be tested for leaks using this gauge.Made from unbreak...More Info
Made from tough plastics used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting c...More Info
The Monument 2580U Vent Sizing Gauge is used to measure the size of the slots in an air vent to calculate the area of ventilation provided by a vent w...More Info
Made from tough plastics used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting c...More Info
Made from tough plastics used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting c...More Info
Monument Gas Test Gauge is made from tough plastic. Used both for testing pipework installations with air for leaks before the introduction of gas and...More Info
The Moore & Wright Protractor Type Depth Gauge has a full range rule adjustment and the readings can be fixed by means of a locknut. Rules are gra...More Info
The Moore & Wright Protractor Type Depth Gauge has a full range rule adjustment and the readings can be fixed by means of a locknut. Rules are gra...More Info
The Moore & Wright Reversible Base Depth Gauges have accurately ground top and bottom faces to allow the base to be reversed, perfect for use in c...More Info
The Moore & Wright Reversible Base Depth Gauges have accurately ground top and bottom faces to allow the base to be reversed, perfect for use in c...More Info
FINISHPRO18BL SPECIFICATION
Air Consumption (At 60 Shots per Minute): 68 l / min
Air Inlet Size A: 1/4" Female
Attachment Type: 18g. Brads
Ac...More Info
FINISHPRO35BL SPECIFICATION
Activation Setting: BF / TF
Air Consumption (at 60 Shots per Minute): 90.6 L / min
Measuring: 15 Ga
Oil-Free: Yes
Wor...More Info
This marking gauge is made from moulded plastic. The plastic stock has an abrasion resistant metal insert and the stem is calibrated for easy setting....More Info
Used to adjust tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow...More Info