Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D1=3/4 inches
D1=19.1 mm
C=1 inches
C=25 mm
Over...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D1=3/4 inches
D1=19.1 mm
C=1 inches
C=25 mm
Over...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D1=3/4 inch
D1=19.1 mm
C=50 mm
Overall length=4 ...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=18.2 mm
C=14 mm
Ol=54 mm
B=18.2 mm
Shank Diame...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=5/8 inch
D=15.9 mm
C=5/8 inch
C=15.9 mm
B=15.9...More Info
Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.
1/4" shank 75¡ bearing guided laminate trimmer...More Info
This is bearing guided and gives a smooth bevel finish for laminates and other materials.
Bearing follows the board beneath.
Dimensions:
C=1/4 inch...More Info
This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim.
Dimensions:
D=1/2 inch
D=12.7 mm
C=1 inch
C=25.4 mm
B=19.1 mm
E=3.2 mm
...More Info
This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim.
Dimensions:
D=1/2 inch
D=12.7 mm
C=1 inch
C=25.4 mm
B=19.1 mm
E=3.2 mm
...More Info
Three flute self-guiding for extra fine trimming of laminate or plywood overlay.
Dimensions:
D=1/2 inch
D=12.7 mm
C=1/2 inch
C=12.7 mm
B=12.7 mm
A=90...More Info
Cuts out apertures in laminate worktops.
The nose of the cutter acts as a guide follower.
Dimensions:
D=12.7 mm
D=1/2 inch
C=30 mm
OL=85 mm
Shank D...More Info
Cuts out apertures in laminate worktops.
The nose of the cutter acts as a guide follower.
Dimensions:
D=1/4 inch
D=6.3 mm
C=45/64 inch
C=18 mm
Shan...More Info
Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutte...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1/2 inch
C=12.7 mm
B=6.35...More Info
The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to f...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1 inch
C=25.4 mm
...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1 inch
C=25.4 mm
B=6.35 m...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=50 mm
B=12.7 mm
A=90 degr...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=38 mm
B=12.7 mm
A=90 degr...More Info
Allows templates to be placed either on top or the bottom of the material, for ease of routing.
Dimensions:
D=19 mm
C=50 mm
B=19 mm
A=90 degrees
Shan...More Info
Self-guiding triple flute cutter.
Extra fine trimming and longer life.
For trimming of laminate or plywood overlay.
Dimensions:
D=1/2 inch
D=12.7...More Info
Self guided with low profile ball bearing guide and bearing fixing screw.
For use in restrictive applications or within rebates of minimum 8mm.
Do...More Info
Quick fit trimming base for use with the CRB for trimming hardwood lipping.
Plastic base plate.
Can be used on lippings of 16mm wide and maximum 6mm (...More Info
Thin kerf anti-kickback sawblades for cordless trim saws.Sawblades designed for a professional finish in soft wood, hard wood,plasterboard, stone fibr...More Info
Solid laminate. Accepts Trend Guide Bushes. Supplied with line-up pin and bush. Ensures concentricity of cutter and guide bush.
Suitable for :
Mak...More Info