Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutte...More Info
Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutte...More Info
Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutte...More Info
Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutte...More Info
Ideal for posts and newel caps for stairs.
Dimensions:
D1=34.9 mm
C=20.6 mm
B=12.7 mm
A=60 degrees
Shank Diameter=1/4 inches
Shank Diameter: 1/4
...More Info
Ideal for posts and newel caps for stairs.
Dimensions:
D1=30.9 mm
C=22 mm
B=12.7 mm
A=67.5 degrees
Shank Diameter=1/4 inches
Shank Diameter: 1/4
...More Info
Ideal for posts and newel caps for stairs.
Dimensions:
D1=22.9 mm
C=19.1 mm
B=12.7 mm
A=70 degrees
Shank Diameter=1/4 inches
Shank Diameter: 1/4
...More Info
These cutters are for use with the Nutool and Axminster Power Tool Centre Dovetail Jigs.
Dimensions:
D=15 mm
C=13.5 mm
OL=63 mm
B=12.7 mm
A=104 degre...More Info
These cutters are for use with the Nutool and Axminster Power Tool Centre Dovetail Jigs.
Dimensions:
D=12.7 mm
C=12.7 mm
OL=63 mm
B=12.7 mm
A=104 deg...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1/2 inch
C=12.7 mm
B=6.35...More Info
The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to f...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1 inch
C=25.4 mm
...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1 inch
C=25.4 mm
B=6.35 m...More Info
For use in a router table only.
Take 5 - 6 passes, increasing the depth with each pass.
Dimensions:
D=67 mm
C=5/8 inch
C=16 mm
B=12.7 mm
R=17.5 mm
S...More Info
For use in a router table only.
Take 5 - 6 passes, increasing the depth with each pass.
Dimensions:
D=86 mm
C=1/2 inch
C=12.7 mm
B=12.7 mm
A=15 degr...More Info
For use in a router table only. Take 5 - 6 passes, increasing the depth with each pass. Dimensions: D=86 mm C=1/2 inch C=12.7 mm B=12.7 mm A=15 degree...More Info
For use in a router table only.
Take 5 - 6 passes, increasing the depth with each pass.
Dimensions:
D=63.5 mm
C=1/2 inch
C=16 mm
B=12.7 mm
R=25.4 mm...More Info
For use in a router table only.
Take 5 - 6 passes, increasing the depth with each pass.
Dimensions:
D=86 mm
C=12.7 mm
B=12.7 mm
R=40 mm
Shank Diamet...More Info
A quarter ellipse cutter for architraves and mould finishes.
For stationary machines - 12000 RPM recommended speed.
Dimensions:
D=69.2 mm
C=16.0 mm
B...More Info
This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC.
For stationary machines - 12000...More Info
These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners.
When using bearing Ref. B95A make two pas...More Info
These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners.
When using bearing Ref. B95A make two pas...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=50 mm
B=12.7 mm
A=90 degr...More Info
Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/2 inch
D=12.7 mm
C=38 mm
B=12.7 mm
A=90 degr...More Info
Self-guiding chamfer/bevel cutter.
Bearing follows the board beneath.
Dimensions:
D=51 mm
C=25 mm
B=12.7 mm
A=45 degrees
Shank Diameter=1/2 inch
Sh...More Info
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round...More Info