MTS Power Tools Search

Categories

Browse By Brand

Results for Search: guide

Returned 403 Results

TREND C198X1/2TC B/GUIDED R/OVER OVOLO 16MM RAD

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round... More Info

£49.08 INC VAT

TREND C199X1/2TC DOUBLE GUIDED TRIMMER 19.1MM X 50MM

Allows templates to be placed either on top or the bottom of the material, for ease of routing. Dimensions: D=19 mm C=50 mm B=19 mm A=90 degrees Shan... More Info

£67.24 INC VAT

TREND C201X1/2TC B/GUIDED CLASSIC 5.2MM RAD

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=35 mm C=14 mm... More Info

£65.32 INC VAT

TREND C203X1/2TC B/GUIDED CLASSIC PANEL 6.3MM RAD

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=35 mm C=14.3 ... More Info

£65.32 INC VAT

TREND C205X1/4TC B/GUIDED 3 FLUTE TRIMMER 12.7 X 25

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay. Dimensions: D=1/2 inch D=12.7... More Info

£28.18 INC VAT

TREND C214AX1/2TC GUIDED 2 DEG UNDERCUT 50MM CUT

2 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter alon... More Info

£75.60 INC VAT

TREND C214X1/2TC B/GUIDED 3 DEG UNDERCUT 50MM CUT

3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb. Dimensions: D=24... More Info

£92.64 INC VAT

TREND C215X1/2TC B/GUIDED CORNER BEAD 7MM RAD

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=31.9 mm D2=28.6 mm C=22.5 mm B=16 mm... More Info

£57.22 INC VAT

TREND C215X1/4TC B/GUIDED CORNER BEAD 7MM RAD

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=31.9 mm D2=28.6 mm C=22.5 mm B=16 mm... More Info

£57.22 INC VAT

TREND C216X1/2TC B/GUIDED CORNER BEAD 9.5MM RAD

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=38.1 mm D2=34.7 mm C=26 mm B=16 mm R... More Info

£67.24 INC VAT

TREND C217X1/2TC B/GUIDED ELEGANT MOULD 10.5MM RAD

Wide combination moulds for edging table tops and shelves. For stationary machines - 16000 RPM recommended speed. Dimensions: D=63 mm C=20 mm B=12.7 ... More Info

£96.92 INC VAT

TREND C218X1/2TC B/GUIDED HAND RAIL 9.5MM RAD

Side profile for an attractive handrail. Can be used in conjunction with C191. to produce the handrail top. Dimensions: D=32 mm C=38 mm B=16 ... More Info

£83.48 INC VAT

TREND C224X1/4TC GUIDED OFFSET PILE CUTTER 2/7MM

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build u... More Info

£59.17 INC VAT

TREND C225CX1/4TC GUIDED PLAIN PILE CUTTER 7X3MM

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build u... More Info

£43.00 INC VAT

TREND C225X1/4TC GUIDED CENTRE LEG PILE 2/7MM

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build u... More Info

£52.50 INC VAT

TREND C226X1/2TC GUIDED HOUSING 19.1MM DIA X 11.1MM

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Dimensions: D=3/4 inch D=19.... More Info

£39.91 INC VAT

TREND C226X1/4TC GUIDED HOUSING 19.1MM DIA X 11.1MM

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Dimensions: D=3/4 inch D=19.... More Info

£39.91 INC VAT

TREND C265X1/4TC B/GUIDED GLAZING BAR 10MM RAD

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=28 mm C=19 mm B=12.7 mm R... More Info

£74.32 INC VAT

TREND C266X1/2TC B/GUIDED GLAZING BAR 17MM RAD

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=27 mm C=17 mm C2=13 mm B... More Info

£69.20 INC VAT

TREND C266X1/4TC B/GUIDED GLAZING BAR 17MM RAD

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=27 mm C=17 mm B=9.5 mm R=... More Info

£69.20 INC VAT

TREND CR/DWS/HG CRAFT PRO HONING GUIDE

CraftPro honing guide. Ensure correct angle is maintained on bevel edge chisels and plane irons when used with diamond whetstone. Roller with alloy ... More Info

£16.34 INC VAT

TREND CURV/8X1000 CURVE GUIDE 8MM X 1000MM

A mini size flexible guide that is used to make a pattern, allows a shape to be cut repeatedly with precision. Will produce round, segmental or elli... More Info

£86.59 INC VAT

TREND CURV/8X500 CURVE GUIDE 8MM X 500MM

A mini size flexible guide that is used to make a pattern, allows a shape to be cut repeatedly with precision. Will produce round, segmental or elli... More Info

£33.38 INC VAT

TREND DWS/HG/01 DIAMOND WHETSTONE HONING GUIDE

A diamond honing guide to ensure the correct angle is maintained on chisels and plane irons when used with a diamond whetstone. Included in Diamond Ho... More Info

£47.30 INC VAT

TREND DWS/HG/SET DIAMOND HONING GUIDE SET

Ensure correct angle is maintained on chisels and plane irons when used with diamond whetstone. Precision roller with alloy body which self-centre cl... More Info

£64.28 INC VAT

TREND GB/A GUIDE BUSH SET 12 OFF E44173

Set of 12 guide bushes. Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other li... More Info

£154.86 INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17]

Terms & Conditions